Wieland France SAS
30 Av. de la Colombière
74950
Scionzier
France
(UTC+1)
Wieland France SAS
Wieland France SAS has been selling Wieland products made of copper and copper alloys on the French market from its Croissy-Beaubourg, Cluses and Yzengremer sites since 1968. The product portfolio consists of rods, wires, sheets and plumbing tubes.
Organization
Business hours
Monday - Thursday
8:00 am - 12:00 pm
1:30 pm - 5:15 pm
Friday
8:00 am - 12:00 pm
8:00 am - 12:00 pm
1:30 pm - 5:15 pm
Friday
8:00 am - 12:00 pm
Goods acceptance times
Monday - Thursday
8:00 am - 11:00 am
1:30 pm - 4:00 pm
Friday
8:00 am - 11:00 am
8:00 am - 11:00 am
1:30 pm - 4:00 pm
Friday
8:00 am - 11:00 am
1968
founded in Paris
100
% subsidiary of Wieland-Werke AG
headquarter
in Cluses
3
warehouses in Marne-la-Vallée (77), Cluses (74) and Yzengremer (80)
Locations
Global proximity you can count on
Wieland France SAS
Wieland France SAS
30 Av. de la Colombière
74950
Scionzier
France
Wieland France SAS | Yzengremer
Wieland France SAS
4 rue des Quatre Vents
80520
Yzengremer
France
Wieland France SAS | Croissy-Beaubourg
Wieland France SAS
1 rue Léon Jouhaux, PA Pariest
77183
Croissy-Beaubourg
France
Products
Our products at a glance
Product categories
Headline
Back to product overviewRods
ecoline®: Lead-free solutions
Sheets and Plates
Smooth industrial tubes
Plumbing tubes
Refrigeration and medical gas tubes
Wire
Materials
| Wieland | EN Designation | EN No. | ASTM UNS-No. |
|---|---|---|---|
| K41 | CuNi1Pb1P* | - | C19150 / C19160 |
| KC1 | CuPb1P | CW113C | C18700 |
| Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. |
|---|---|---|---|---|
| Z11 | CuZn35Pb1 | CW600N | C34000 | |
| Z12 | CuZn35Pb2 | CW601N | C34200 / C34500 | |
| Z14 | CuZn37Pb2 | CW606N | C35300 | |
| Z21 | CuZn38Pb2 | CW608N | C3713 | |
| Z23 | CuZn36Pb3 | CW603N | C36000 | |
| Z29 | CuZn39Pb2 | CW612N | C37700 | |
| Z31/Z41/Z48 | CuZn40Pb2 | CW617N | C38000 | |
| Z32/Z33 | CuZn39Pb3 | CW614N | C38500 | |
| Z40 | CuZn43Pb2Al | CW624N | - | |
| Z43 | CuZn33Pb1AlSiAs | CW725R | - | |
| Z45/Z46 | CuZn36Pb2As | CW602N | C35330 |
| Wieland | EN Designation | EN No. | ASTM UNS-No. |
|---|---|---|---|
| eco M58® | CuZn42 | CW510L | - |
| Wieland | EN Designation | EN No. | ASTM UNS-No. |
|---|---|---|---|
| S40 | CuZn37Mn3Al2PbSi | CW713R | C67420 |
| eco ST2 | CuZn35Sn1P | CW727R | - |
| eco ST3 | CuZn29Si1SnP | CW729R | - |
| eco ST4 | CuZn42 | CW510L | - |
| eco SW1® | CuZn21Si3P | CW724R | C69300 |
| eco SZ2® | CuZn36Si1P | CW726R | C68370 |
| eco SZ3® | CuZn40SiP | CW728R | - |
| eco SZ4® | CuZn42 | CW510L | C28500 |
| eco SZ5® | CuZn40 | CW509L | C27450 |
| Wieland | EN Designation | EN No. | ASTM UNS-No. |
|---|---|---|---|
| B09/B10 | CuSn8 | CW453K | C52100 |
| B44/B45 | CuSn4Pb4Zn4 | CW456K | C54400 |
| eco BS4® | CuSn5NiPS* | - | - |
| Wieland | EN Designation | EN No. | ASTM UNS-No. |
|---|---|---|---|
| U33 | CuAl10Ni5Fe4 | CW307G | C63000 |
Wieland ecoline is our answer to enable your future business: the lead-free product line fulfills your individual needs for an efficient production and future oriented product development. And is, of course, compliant with the latest requirements of legislative directives on lead-free materials.
Learn more about
Wieland ecoline
We can offer you a wide range of materials, geometries, and surface qualities to choose from. Many geometries are available from our sheets stores.
| Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. | Dimensions |
|---|---|---|---|---|---|
| K19 | Cu-DHP | CW024A | C12200 | C1220 | on request |
| K32 | Cu-ETP | CW004A | C11000 | C1100 | on request |
| Wieland | EN Designation | EN No. | ASTM UNS-No. | Dimensions | Temper |
|---|---|---|---|---|---|
| Z30 | CuZn39Pb2 | CW612N | C37700 | 670 × 1340 and 600 × 2000 format; thicknesses from 0.8 to 30 mm | hardened |
| Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. | Dimensions | Temper |
|---|---|---|---|---|---|---|
| M10 | CuZn10 | CW501L | C22000 | C2200 | 670 × 1340, 800 × 2000, 600 × 2000 format; thicknesses from 0.3 to 16 mm | annealed, semihardened and hardened |
| M15 | CuZn15 | CW502L | C23000 | C2300 | 670 × 1340, 800 × 2000, 600 × 2000 format; thicknesses from 0.3 to 16 mm | annealed, semihardened and hardened |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 670 × 1340, 800 × 2000, 600 × 2000 format; thicknesses from 0.3 to 16 mm | annealed, semihardened and hardened |
| Wieland | EN Designation | EN No. | ASTM UNS-No. | Dimensions |
|---|---|---|---|---|
| N12 | CUNi12Zn24 | CW403J | C75700 | 600 × 2000 and 670 × 1340 format; thicknesses from 0.3 to 3.5 mm |
Available materials
| Wieland | EN | EN-Nr. | UNS |
| K08 | Cu-OFE | CW009A | C10100 |
| K12 | Cu-HCP | CW021A | C10300 |
| K20 / K21 / K28 | Cu-DHP | CW024A | C12200 |
| K30 | Cu-OF | CW008A | C10200 |
| K65 | CuFe2P | CW107C | C19400 |
| L10 | CuNi10Fe1Mn | CW352H | C70600 |
| L30 | CuNi30Mn1Fe | CW354H | C71500 |
Delivery forms
- Level wound coils: 100 kg, 150 kg, 300 kg, 530 kg
- Straight lengths
- Rings
Materials
K65 - Sustainable and efficient
Sustainable and efficient – two keywords that have had a decisive impact on our time and have gained in relevance in recent years, especially in refrigeration. Increased environmental awareness in society and industry has therefore led to a kind of renaissance of natural refrigerants, especially CO2. Wieland supports this turnaround with a tube system that meets the high requirements of CO2 as a refrigerant.
Wieland K65 tubes have been designed for CO2 applications in the commercial field, especially that of supermarket refrigeration systems. Wieland K65 alloy provides the mechanical strength high enough to withstand the high operating pressures of CO2. At the same time, K65 tubes have outstanding processing properties, similar to those of standard copper (Cu-DHP/C12200).
All Wieland K65 tubes are available in the soft condition (R300/O61) to ensure excellent bending / flaring and collaring properties.
Wieland K65 tubes are offered from stock in two pressure ranges, 80 bar and 120 bar, and in dimensions ranging from 3/8” up to 2-1/8”.
Moreover, K65 tubes are also available in individual dimensions and different delivery forms.
For industrial processing, in particular CO2 heat exchanger (evaporator / gas cooler) manufacturing, level wound coils (LWC) are offered.
More K65 products in other categories
Your benefits
- Pressure resistance tailormade to your needs
- Cost reduction through weight reduction
- Proven processing technology: brazing instead of welding!
- Excellent heat transfer
- Design according to EN 14276 - TUEV or UL certification on demand
Typical applications
- Components of R744 refrigeration systems
- Fin coil heat exchangers for higher operation pressures (e.g. R744 evaporators or gas coolers )
- Shell and tube heat exchangers for higher operation pressures (e.g. R744 evaporators or gas coolers)
Technical properties
- Material: K65
- Conditions: soft R300/O61 and hard R420/H80
- Delivery form: Level wound coils or straight lengths
- Coil weights: 100 kg, 150 kg, 300 kg
- Available dimensions: 5 - 28 mm for LWC; 5 - 110 mm for straight lengths
- Usual standards: EN 12735-1 / EN 14276 / ASTM B 1017
Further information
Materials
For a more sustainable future in construction.
With its 100 % share of recycled material, the cuprolife copper tube makes a sustainable difference, and thus makes a significant contribution to the advancement of building and construction as well as building services.
Every cuprolife tube from Wieland is manufactured in keeping with the mass balance approach – using a process with 100 % recycled copper. As the starting point when verifying cuprolife, TÜV SÜD tested the procedure for calculating the 100 % recycled content*.
The new standard in copper tubes: cuprolife®.
Thanks to cutting-edge manufacturing techniques, cuprolife tubes exceed even the highest requirements. Optimal efficiency and reliability are guaranteed along with an exceptional service life. cuprolife tubes are universally usable. cuprolife is permanently in stock and can be supplied in any size from 6 x 1 mm to 159 x 3 mm.
Fields of application
- Domestic hot and cold water supply
- Heating
- Gas
- Liquid gas
- Heating oil / biofuel oil B10
- Solar systems
- Rainwater
- Industrial compressed air
- Sprinkler systems
- Firefighting systems
Technical features
- 100 % recycled copper*
- Design according to EN 1057, quality assured
- Made of pure copper Cu-DHP
- With quality mark and DVGW certification: DV-7204AU2106 (6 to 159 mm outside diameter)
- Universal use in a range of finely differentiated dimensions
- Optimum availability and compatibility with a wide range of fittings
- Maximum operating temperature at 10 bar operating pressure: 250 °C (applies to dimensions up to DN 150)
- Fire resistance: EN 13501-1 – A1 (nonflammable)
- Dimensions according to DVGW GW 392 (6 to 159 mm) with closed tube ends
- For optimal drinking water hygiene
*Mass balance approach, based on ISO 14021, verified by TÜV SÜD.
Reliable for all areas of home installation
For many years, installers have been relying on SANCO branded copper tubes. The tubes are very reliable, suitable for all areas of domestic installation and have more than proven their worth in practice. Whether drinking water supply (hot and cold), heating systems, oil, gas and liquid gas supplies as well as thermal solar systems: Wieland SANCO tubes are always the right choice and, of course, covered by the relevant regulations.
Technical features
- Patented manufacturing process: SANCO tubes are significantly better than required by standards and regulations.
- Design according to EN 1057, quality assured
- Made of pure copper Cu-DHP
- With quality mark and DVGW certification:
DV-7204AU2106 (12 to 159 mm outside diameter). - Universal use in a range of finely differentiated dimensions
- Optimum availability and compatibility with a wide range of fittings
- Maximum operating temperature: 250 °C
- Fire resistance: EN 13501-1-A1 (non-flammable)
- Dimensions according to DVGW GW 392 (12 to 159 mm) with closed tube ends
- For optimal drinking water hygiene
- Wide range of certifications available, such as Kitemark, Afnor, KIWA, DVGW and many others
Fields of application
- Domestic hot and cold water supply
- Heating systems
- Gas and oil services for heating and cooking
- Solar systems
- Rainwater
- Industrial compressed air
- Sprinkler and Fire-fighting-systems
- Further applications in consultation with our technical advisory service
WICU
WICU tubes a have a mill-applied protective coating. They are therefore suitable for concealed installation under plaster or in environments with an aggressive atmosphere, and for installation outdoors, either above or below ground.
Technical features
- Design according to EN 1057, quality assured
- Made of pure copper Cu-DHP
- With quality mark and DVGW certification:
- DV-7204AU2106 (12 to 42 mm outside diameter).
- Protective coating conforms to EN 13349 and DIN 30672-1 class B
- Reduction of condensation
- Fire resistance: EN 13501-1-E
- Color of coating: light gray
- Temperature range up to 100 °C
Fields of application
- Domestic hot and cold water supply
- Heating systems
- Gas and oil services for heating and cooking
- Rainwater
- Industrial compressed air
- Further applications in consultation with our technical advisory service
WICU Flex
WICU Flex is a plumbing tube with a flexible coating for rapid installation. The coating consists of closed-cell PE foam covered by a structured protective film. WICU Flex is supplied in coils for rapid connection to manifolds etc. and for underfloor installations.
Technical properties
- Design according to EN 1057, quality assured
- Made of pure copper Cu-DHP
- With quality mark and DVGW certification:
DV-7204AU2106 (12 to 22 mm outside diameter) - CFC/FKW-free polyethylene foam (PE) with a
- PE structural foil
- Sound insulation: DIN 4109 - A1
- Thermal conductivity of the insulation layer according to DIN 52613:
= 0.040 W/mK at 40 °C - Fire resistance: N 13401-1-E
- Color of coating: white
- Temperature application range: up to 100 °C
Fields of application
- Connecting tubes
- Domestic hot and cold water supply
- Central heating systems
cuprotherm CTX
cuprotherm CTX tubes are copper tubes with a firmly adhering coating. Due to their structure, they are very easy to process and are characterized by a flexibility so far unknown for metal tubes. CTX tubes are a technically high-quality and at the same time economically interesing solution: They offer an attractive price per meter for copper tubes at stable conditions, and are therefore also convincing in terms of reliability in planning.
Technical features
- Flexible copper tube made of pure copper Cu-DHP
- Temper: soft R220 according to EN 1057 with firmly adhering coating made of PE-RT
- Fire behavior EN 13501-1, class E
- Color of the coating: white, similar to RAL 9010 (pure white)
- Temperature application range: up to 100 °C
Fields of application
- Heating
- Cooling
- Radiator connection
- Rainwater harvesting systems
- Ground collectors (water/glycol)
- Concrete core activation
Materials
K65 - Sustainable and efficient
two keywords that have had a decisive impact on our time and have gained in relevance in recent years, especially in refrigeration. Increased environmental awareness in society and industry has therefore led to a kind of renaissance of natural refrigerants, especially CO2. Wieland supports this turnaround with a tube system that meets the high requirements of CO2 as a refrigerant.
Wieland K65 tubes have been designed for CO2 applications in the commercial field, especially that of supermarket refrigeration systems. Wieland K65 alloy provides the mechanical strength high enough to withstand the high operating pressures of CO2. At the same time, K65 tubes have outstanding processing properties, similar to those of standard copper (Cu-DHP/C12200).
Wieland K65 tubes are offered from stock in two pressure ranges, 80 bar and 120 bar, and in dimensions ranging from 3/8” up to 2-1/8”.
All Wieland K65 tubes are available in the soft condition (R300/O61) to ensure excellent bending / flaring and collaring properties.
Other dimensions and delivery forms such as level wound coils are offered for industrial processing, in particular manufacturing of CO2 heat exchangers (evaporator/gas cooler).
More K65 products in other categories
Your benefits
- Cost reduction through weight reduction
- Proven processing technology: brazing instead of welding!
- Economical and safe installation of regrigeration systems with up to 120 bar operation pressure
- Excellent heat transfer
- Design according to EN 14276
Typical applications
- Pipelines for refrigeration systems, in particular for CO2 refrigerant, with an operation pressure of up to 120 bar
Technical properties
- Material: K65
- Operation pressure: 80 bar and 120 bar
- Condition: soft R300/O61
- Delivery form: straight lengths of 5 m
- Available dimensions: 9,52 - 53,97 mm (3/8" - 2-1/8")
- Tube ends: closed
- Usual standards: EN 14276 / EN 12735-1
Further information
Wieland can offer you wire and sectional made of a wide range of materials: wrought copper alloys and alloys extending from brass, both with and without lead, to bronze, to German silver. And in combination with material properties, sizes, and geometries, our delivery portfolio can meet virtually every requirement. Simply contact us!
| Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. |
|---|---|---|---|---|
| Z12 | CuZn35Pb2 | CW601N | C34200 / C34500 | |
| Z21 | CuZn38Pb2 | CW608N | C3713 | |
| Z23 | CuZn36Pb3 | CW603N | C36000 | |
| Z32/Z33 | CuZn39Pb3 | CW614N | C38500 |
| Wieland | EN Designation | EN No. | ASTM UNS-No. |
|---|---|---|---|
| eco M58® | CuZn42 | CW510L | - |
| Wieland | EN Designation | EN No. | ASTM UNS-No. |
|---|---|---|---|
| eco ST2 | CuZn35Sn1P | CW727R | - |
| eco ST3 | CuZn29Si1SnP | CW729R | - |
| eco ST4 | CuZn42 | CW510L | - |
| eco SW1® | CuZn21Si3P | CW724R | C69300 |
| Wieland | EN Designation | EN No. | ASTM UNS-No. |
|---|---|---|---|
| N31 | CuNi7Zn39Pb3Mn2 | CW400J | - |
Resources
Information material and important documents for download
1
result/s
Information-602930900-GS_Quality-Assurance-Agreement-QAA-_WF.pdf
(QAA)
235.81 KB
Contact person
Get in touch - Your contact person at Wieland France SAS
Cyril Vulin
Managing Director
+33 4 50 98 17 92
Send email
Nicolas Pabiou
Sales Director
Wieland France
+33 6 60 06 56 79
Send email
Yannick Quinton
SBU Lead Aerospace Europe
Wieland France
+33 6 73 47 67 00
Send email
Hubert Duhoux
Administration | Finance
Wieland France
+33 450 914513
Send email
Agnès Fiogère
Sales Extruded and Drawn Products
Wieland France
+33 4 50 98 48 48
Send email
Christina Lecompte
Plumbing tubes France
Wieland France
+33 4 50987380
Send email
Dacia Le Marié
Sales Tubes
Wieland France
+33 4 50 91 45 18
Send email
Kerstin Bochu
Sales sheets / Extruded and Drawn Products
Wieland France
+33 4 50 91 45 11
Send email
Cindy Rossi
Sales Extruded and Drawn Products
Wieland France
+33 450 914511
Send email
Wieland France SAS
30, avenue de la Colombière
74950 Scionzier
France
President
Cyril Vulin
Registered office
Scionzier
Company registered in the Annecy trade register under number 682 033 519 000 62
VAT identification number: FR 29 682 033 519
Welcome to Wieland. I am your virtual assistant.
Do you need help finding information?
Already know your search term? Then go ahead and use our full text search. You will get a list of all relevant results.