Smooth and innergrooved tubes

 

Wieland manufactures tubes tailored to customer requirements and the highest quality standards according to individual demands for a wide range of applications.

 

We burn for your individual requirements. Complex process sequences, continuously changing requirements and international competition pose ever new challenges for your company. With our customizing services we are able to master them together. This includes customer-specific services that allow you to break new ground, such as special qualities in strength and hardness, customer-specific product developments in form and function, as well as individual logistics solutions.




Our range of products

Our smooth and innergrooved tubes at a glance.

Our complete product range

To show the product portfolio of a specific location, please select the company:

Smooth industrial tubes

Innergrooved industrial tubes

Plumbing tubes

Refrigeration and medical gas tubes

Alloy tubes

Tubes

Available materials

WielandENEN-Nr.UNS
K08Cu-OFECW009AC10100
K12Cu-HCPCW021AC10300
K20 / K21 / K28Cu-DHPCW024AC12200
K30Cu-OFCW008AC10200
K65CuFe2PCW107CC19400
L10CuNi10Fe1MnCW352HC70600
L30CuNi30Mn1FeCW354HC71500

 

Delivery forms

  • Level wound coils:  100 kg, 150 kg, 300 kg, 530 kg
  • Straight lengths
  • Rings

 



Materials


K65 - Sustainable and efficient

Sustainable and efficient – two keywords that have had a decisive impact on our time and have gained in relevance in recent years, especially in refrigeration. Increased environmental awareness in society and industry has therefore led to a kind of renaissance of natural refrigerants, especially CO2. Wieland supports this turnaround with a tube system that meets the high requirements of CO2 as a refrigerant.

Wieland K65 tubes have been designed for CO2 applications in the commercial field, especially that of supermarket refrigeration systems. Wieland K65 alloy provides the mechanical strength high enough to withstand the high operating pressures of CO2. At the same time, K65 tubes have outstanding processing properties, similar to those of standard copper (Cu-DHP/C12200). 

All Wieland K65 tubes are available in the soft condition (R300/O61) to ensure excellent bending / flaring and collaring properties.

Wieland K65 tubes are offered from stock in two pressure ranges, 80 bar and 120 bar, and in dimensions ranging from 3/8” up to 2-1/8”.

Moreover, K65 tubes are also available in individual dimensions and different delivery forms.
For industrial processing, in particular CO2 heat exchanger (evaporator / gas cooler) manufacturing, level wound coils (LWC) are offered.

 

More K65 products in other categories

 

Your benefits

  • Pressure resistance tailormade to your needs
  • Cost reduction through weight reduction
  • Proven processing technology: brazing instead of welding!
  • Excellent heat transfer
  • Design according to EN 14276 - TUEV or UL certification on demand

 

Typical applications

  • Components of R744 refrigeration systems
  • Fin coil heat exchangers for higher operation pressures (e.g. R744 evaporators or gas coolers )
  • Shell and tube heat exchangers for higher operation pressures (e.g. R744 evaporators or gas coolers)

 

Technical properties

  • Material: K65
  • Conditions: soft R300/O61 and hard R420/H80 
  • Delivery form: Level wound coils or straight lengths
  • Coil weights: 100 kg, 150 kg, 300 kg
  • Available dimensions: 5 - 28 mm for LWC; 5 - 110 mm for straight lengths
  • Usual standards: EN 12735-1 / EN 14276 / ASTM B 1017

 

Further information



K65 - Sustainable and efficient

two keywords that have had a decisive impact on our time and have gained in relevance in recent years, especially in refrigeration. Increased environmental awareness in society and industry has therefore led to a kind of renaissance of natural refrigerants, especially CO2. Wieland supports this turnaround with a tube system that meets the high requirements of COas a refrigerant.

Wieland K65 tubes have been designed for COapplications in the commercial field, especially that of supermarket refrigeration systems. Wieland K65 alloy provides the mechanical strength high enough to withstand the high operating pressures of CO2. At the same time, K65 tubes have outstanding processing properties, similar to those of standard copper (Cu-DHP/C12200). 

Innergrooved K65 tubes for manufacturing of COheat exchangers (evaporator / gas cooler) are available in individual dimensions. These are delivered in level wound coils (LWC) or straight lengths alternatively.

Wieland K65 tubes are also available from stock in standard dimensions.

 

More K65 products in other categories

 

Your benefits

  • Pressure resistance tailormade to your needs
  • Cost reduction through weight reduction
  • Proven processing technology: brazing instead of welding!
  • Excellent heat transfer
  • Design according to EN 14276 - TUEV certification on demand

 

Typical applications

  • Fin coil heat exchangers for higher operation pressures (e.g. R744 evaporators or gas coolers)
  • Shell and tube heat exchangers for higher operation pressures (e.g. R744 evaporators or gas coolers)

 

Technical properties

  • Materials: K65
  • Conditions: soft R300/O61 and hard R420/H80
  • Delivery form: Level wound coils or straight lengths
  • Coil weights: 100 kg, 150 kg, 300 kg
  • Available dimensions: 5 - 16 mm
  • Usual standards: EN 12735-1 / EN 14276 / ASTM B 1017

 

Further information


 

For a more sustainable future in construction.

With its 100 % share of recycled material, the cuprolife copper tube makes a sustainable difference, and thus makes a significant contribution to the advancement of building and construction as well as building services. 

Every cuprolife tube from Wieland is manufactured in keeping with the mass balance approach – using a process with 100 % recycled copper. As the starting point when verifying cuprolife, TÜV SÜD tested the procedure for calculating the 100 % recycled content*.

 

The new standard in copper tubes: cuprolife®.

Thanks to cutting-edge manufacturing techniques, cuprolife tubes exceed even the highest requirements. Optimal efficiency and reliability are guaranteed along with an exceptional service life. cuprolife tubes are universally usable. cuprolife is permanently in stock and can be supplied in any size from 6 x 1 mm to 159 x 3 mm.

 

Fields of application

  • Domestic hot and cold water supply
  • Heating
  • Gas
  • Liquid gas
  • Heating oil / biofuel oil B10
  • Solar systems
  • Rainwater
  • Industrial compressed air
  • Sprinkler systems
  • Firefighting systems

 

Technical features

  • 100 % recycled copper*
  • Design according to EN 1057, quality assured
  • Made of pure copper Cu-DHP
  • With quality mark and DVGW certification: DV-7204AU2106 (6 to 159 mm outside diameter)
  • Universal use in a range of finely differentiated dimensions
  • Optimum availability and compatibility with a wide range of fittings
  • Maximum operating temperature at 10 bar operating pressure: 250 °C (applies to dimensions up to DN 150)
  • Fire resistance: EN 13501-1 – A1 (nonflammable)
  • Dimensions according to DVGW GW 392 (6 to 159 mm) with closed tube ends
  • For optimal drinking water hygiene

 

*Mass balance approach, based on ISO 14021, verified by TÜV SÜD.

 

Learn more


FRIGOTEC® tubes are seamless drawn copper tubes for use in refrigeration and air conditioning. The inner surface of the tubes has a special degree of cleanliness. The tube ends are already sealed at the factory.

FRIGOTEC® tubes are subject to a constricted carbon residue on the inner tube surface in accordance with EN 12735-1. Due to the range of dimensions from 6 × 1 mm to 108 × 2.5 mm, systems of any size can be realized. The pipes are ideally connected with >B< solder fittings. In addition, the FRIGOTEC tubes in R250 and R290 condition in the dimensions 8 × 1 mm to 64 × 1 mm comply with EN 13348 for medical gases.

The applicable standards and guidelines must be observed during planning, processing and operation.


From the broad spectrum of our alloy portfolio, we manufacture tubes to customer specifications and the highest quality standards in accordance with individual requirements for a wide range of applications.
 
We manufacture alloy tubes in straight lengths for you. We can supply almost any dimension in a wide range of alloys, from 3 mm outside diameter to large-diameter tubes with an outside diameter of approx. 320 mm. All tubes are drawn seamless, high precision and constant properties are a matter of course.  
We would be pleased to work out the optimum solution for your application together with you. 

You do not need a round tube but a profile tube? - Please contact us! With our interdisciplinary team of experts we will find a solution. 



Materials

We manufacture seamless tubes with outer diameters up to 320 mm. They are suitable for electrical engineering and telecommunications, heat transfer and apparatus engineering.
Low-alloy copper materials with higher strength serve as brake line tubes in motor vehicles.


We have specialties such as dezincification-resistant materials in our range, and alloys with high wear resistance, as used in crude oil production.

Handrails, shower bars, towel rails, handgrip elements, water inlets and outlets, drains, decorative claddings: For these and many other products, the metal
The metal goods industry uses tubes made of copper alloys for these and many other products.
 


Wieland EN Designation EN No. ASTM UNS-No.
K18/K32 Cu-ETP CW004A C11000
K20/K21/K28 Cu-DHP CW024A C12200




Contact person

Get in touch - Our experts for smooth and innergrooved tubes



Foto Florian Diesch Florian Diesch
SBU Manager | Heating & Cooling | BU Extruded Products
Wieland-Werke AG
+49 731 944 6326

Foto Rainer Hepp Rainer Hepp
SBU Manager | Plumbing Wholesaler
Wieland-Werke AG
+49 731 944 1170







Welcome to Wieland. I am your virtual assistant.

Do you need help finding information?