
- Wieland
- Products
- Product categories
- Rods and sectional rods
Rods and sectional rods
The right alloy, geometry, and strength – precise and efficient: simply Wieland. Rods and profiled rods are used in a wide range of applications, extending over forged sanitary fittings, lock cylinders and turned parts for machine construction. You can choose from a virtually unlimited number of sizes and geometries.
Special alloys tailored to your specific application are recommended by our Applications Engineering experts.
Our range of products
Our rods and sectional rods at a glance.
The products of Wieland Metalix are displayed.

ECOBRASS

Hexagonal rod

Machining

Rectangular rod

Round rod

Sectional rod

Square rod

WICONNEC

ecoline: Lead-free solutions
ECOBRASS

Wieland recognized the potential of environmentally friendly, lead-free machining brass at a very early date, and adopted the pioneering role in Europe by developing ECOBRASS. This proved to be a farsighted course into the future. Today, ECOBRASS is marketed worldwide over a cooperation network and available, even in smaller quantities, from trade partners. We also market this material under the name “CUPHIN” for sanitary products.
Materials
Material designation
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
SW1 | CuZn21Si3P | CW724R | C69300 |
Hexagonal rod

Materials
Material designation
Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. | Stock Program |
---|---|---|---|---|---|
Z21 | CuZn38Pb2 | CW608N | C35000 | C3713 | |
Z33 | CuZn39Pb3 | CW614N | C38500 | Wieland-Z33-hexagonal-rod.pdf | |
Z41 | CuZn40Pb2 | CW617N | C38000 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
SW1 | CuZn21Si3P | CW724R | C69300 |
Wieland | EN Designation | EN No. | ASTM UNS-No. | Stock Program |
---|---|---|---|---|
PX | ≈11SMnPb37 | ≈1.0737 | ≈G12144 | PX-hexagonal-rod.pdf |
Wieland | EN Designation | EN No. | ASTM UNS-No. | Stock Program |
---|---|---|---|---|
X8CrNiS18-9 (h11) | - | - | - | X8CrNiS18-9_h11-pulled-hexagonal-rod.pdf |
Wieland | EN Designation | EN No. | ASTM UNS-No. | Stock Program |
---|---|---|---|---|
X14CrMoS17 (h11) | - | - | - | X14CrMoS17_h11-pulled-hexagonal-rod.pdf |
Machining

Our W5000 round rods are our premium product for your high performance machining operations. We guarantee the minimum diameter variance in the one batch and a straightness of 0.55 mm/m up to a diameter of 80 millimetres. And best of all: tight alloying tolerances for consistent machining results. Fine, uniform lead distribution for top machinability. Low contamination levels and optimised phase distribution for long tool lives.
Learn more
W5000 precision brass rods
The closer the input stock approaches the end product, the higher the efficiency of downstream machining. The Wieland E5006 precision hexagon rod fulfils these expectations in a quite special way: It presents the precise outer contours of a workpiece. Unlike machined multiedge cross sections, drawn edged rods are characterised by extremely smooth, plane, and compacted surfaces. Moreover, they lend the workpiece a continuous grain structure of high impact toughness. Obvious material savings are yet another benefit.
Learn more
W5006 precision brass rods
Rectangular rod

Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
Z33 | CuZn39Pb3 | CW614N | C38500 |
Round rod

Materials
- Copper
- High-copper alloy
- High-performance alloys
- Machining brass
- Copper-nickel alloy
- Brass
- Special brass
- Phosphor bronze
- Nickel silver
- Cast Alloy
- Aluminium
- Machines steel
- Chrome nickel steel
- Chrome steel
- Special steel
Material designation
Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. | Stock Program |
---|---|---|---|---|---|
K32 | Cu-ETP | CW004A | C11000 | C1100 | |
KD1 | - | CW102C | - | CuBe2Pb_EN.pdf | |
KD3 | - | CW118C | - | Tellurcopper-round.pdf |
Wieland | EN Designation | EN No. | ASTM UNS-No. | Stock Program |
---|---|---|---|---|
K41 | - | - | C19150 / C19160 | Wiconnec-round-K41_EN.pdf |
KC1 | CuPb1P | CW113C | C18700 | Wiconnec-round-bars-KC1_EN.pdf |
KS2 | CuSP* | CW114C | C14700 | |
KS4 | CuNi1SP* | - | - |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
K55 | CuNi3Si1Mg* | - | C70250 |
Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. | Stock Program |
---|---|---|---|---|---|
Z11 | CuZn35Pb1 | CW600N | C34000 | ||
Z12 | CuZn35Pb2 | CW601N | C34200 / C34500 | Wieland-Z12-round-rod.pdf | |
Z14 | CuZn37Pb2* | CW606N | C35300 | ||
Z21 | CuZn38Pb2 | CW608N | C35000 | C3713 | Wieland-Z21-round-rod.pdf |
Z23 | CuZn36Pb3 | CW603N | C36000 | Wieland-Z23-round-rod.pdf | |
Z29 | CuZn39Pb2 | CW612N | C37700 | ||
Z30 | CuZn39Pb2 | CW612N | C37700 | ||
Z31 | CuZn40Pb2 | CW617N | C38000 | ||
Z32 | CuZn39Pb3 | CW614N | C38500 | ||
Z33 | CuZn39Pb3 | CW614N | C38500 | Wieland-Z33-round-rod-pressed.pdf | |
Z33 | CuZn39Pb3 | CW614N | C38500 | Wieland-Z33-W5000-round-rod.pdf | |
Z41 | CuZn40Pb2 | CW617N | C38000 | Wieland-Z41-round-rod.pdf | |
Z43 | CuZn33Pb1AlSiAs | CW725R | - | ||
Z48 | CuZn40Pb2 | CW617N | C38000 | Wieland-Z48-round-rod.pdf |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
LV3 | CuNi9Sn* | - | C72700 |
Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. |
---|---|---|---|---|
M30/M34 | CuZn30 | CW505L | C26000 | C2600 |
M37/M38 | CuZn37 | CW508L | C27200 | C2720 |
M57 | CuZn42 | CW510L | - | |
M58 | CuZn42 | CW510L | - | |
M59 | - | CW510L | - | |
M60 | CuZn40 | CW509L | C27450 |
Wieland | EN Designation | EN No. | ASTM UNS-No. | Stock Program |
---|---|---|---|---|
S34 | - | - | C67340 | |
S40 | CuZn37Mn3Al2PbSi | CW713R | C67420 | Wieland-S40-round-rod.pdf |
SW1 | CuZn21Si3P | CW724R | C69300 | ECOBRASS-round-bars-SW1_EN.pdf |
Wieland | EN Designation | EN No. | ASTM UNS-No. | Stock Program |
---|---|---|---|---|
B06 | CuSn6 | CW452K | C51900 | |
B44 | CuSn4Pb4Zn4 | CW456K | C54400 | Wiconnec-round-bars-B44_EN.pdf |
Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. | Stock Program |
---|---|---|---|---|---|
N18 | CuNi18Zn20 | CW409J | C76400 | C7521 | |
N29 | CuNi18Zn20 | CW409J | - | ||
N31 | CuNi7Zn39Pb3Mn2 | CW400J | - | Wieland-N31-round.pdf | |
N32 | CuNi12Zn30Pb1 | CW406J | - | Wieland-N32-round-rod.pdf | |
N37 | CuNi18Zn19Pb1 | CW408J | - | ||
N48 | CuNi12Zn38Mn5Pb2 | CW407J | - | ||
N59 | CuNi9Zn41FeMn* | - | - |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
G07 | CuSn7Zn4Pb7-C | CC493K | - |
Wieland | EN Designation | EN No. | ASTM UNS-No. | Stock Program |
---|---|---|---|---|
AlMg1SiCu | - | EN AW-6061 | - | Alu-AlMg1SiCu-round-rod.pdf |
AlSi1MnMgBi | - | EN AW-6026 | - | Alu-AISiMnMgBi-round-rod.pdf |
Anticorodal-112 | - | EN AW-6082 | - | Alu-Anticorodal-112-round-rod.pdf |
Decoltal-500 | - | EN AW-2011 | - | Alu-Decoltal-500-round-rod.pdf |
Perunal-215 | - | EN AW-7075 | - | Alu-Perunal-215-round-rod.pdf |
Wieland | EN Designation | EN No. | ASTM UNS-No. | Stock Program |
---|---|---|---|---|
PTX | ≈11SMnPb37(+Bi+Te/Se) | ≈1.0737 | ≈G12144 | PTX-round-rod.pdf |
PX | ≈11SMnPb37 | ≈1.0737 | ≈G12144 | PX-round-rod.pdf |
Wieland | EN Designation | EN No. | ASTM UNS-No. | Stock Program |
---|---|---|---|---|
X6CrNiCuS18-9-2 (h8) | X6CrNiCuS18-9-2 (h8) | 1.4570 | AISI 303Cu | X6CrNiCuS18-9-2_h8-polished-round-rod.pdf |
X6CrNiCuS18-9-2 (h9) | X6CrNiCuS18-9-2 (h9) | 1.4570 | AISI 303Cu | X6CrNiCuS18-9-2_h9-pulled-round-rod.pdf |
Wieland | EN Designation | EN No. | ASTM UNS-No. | Stock Program |
---|---|---|---|---|
X14CrMoS17 (h8) | X14CrMoS17 (h8) | 1.4104 | AISI 430F | X14CrMoS17_h8-polished-round-rod.pdf |
X14CrMoS17 (h9) | X14CrMoS17 (h9) | 1.4104 | AISI 430F | X14CrMoS17_h9-pulled-round-rod.pdf |
X46CrS13 (h8) | X46CrS13 (h8) | 1.4035 | AISI 420C+S | X46CrS13_h8-polished-round-rod.pdf |
Wieland | EN Designation | EN No. | ASTM UNS-No. | Stock Program |
---|---|---|---|---|
ETG 100 | ≈44SMn28 | ≈1.0762 | ≈G11440 | ETG_100-round-rod.pdf |
ETG 88 | ≈44SMn28 | ≈1.0762 | ≈G11440 | ETG-88-round-rod.pdf |
Sectional rod

Materials
Material designation
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
Z33 | CuZn39Pb3 | CW614N | C38500 |
Wieland | EN Designation | EN No. | ASTM UNS-No. | Dimensions |
---|---|---|---|---|
M60 | CuZn40 | CW509L | C27450 | Consult |
Square rod

Materials
Material designation
Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. |
---|---|---|---|---|
K32 | Cu-ETP | CW004A | C11000 | C1100 |
Wieland | EN Designation | EN No. | ASTM UNS-No. | Stock Program |
---|---|---|---|---|
Z33 | CuZn39Pb3 | CW614N | C38500 | Wieland-Z33-square-rod.pdf |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
SW1 | CuZn21Si3P | CW724R | C69300 |
Wieland | EN Designation | EN No. | ASTM UNS-No. | Stock Program |
---|---|---|---|---|
PX | ≈11SMnPb37 | ≈1.0737 | ≈G12144 | PX-square-rod.pdf |
WICONNEC

The Wieland WICONNEC brand offers a range of copper materials in the form of rods and wires that are ideal for machined sockets and pins for plug connectors. This material portfolio also offers brass materials in addition to specially developed copper alloys for complex turned plug connectors.
Materials
- Copper
- High-copper alloy
- High-performance alloys
- Machining brass
- Copper-nickel alloy
- Brass
- Special brass
- Phosphor bronze
Material designation
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
K44 | - | - | C19140 / C19150 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
K41 | - | - | C19150 / C19160 |
KC1 | CuPb1P | CW113C | C18700 |
KS2 | CuSP* | CW114C | C14700 |
KS4 | CuNi1SP* | - | - |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
K55 | CuNi3Si1Mg* | - | C70250 |
Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. |
---|---|---|---|---|
Z10 | CuZn37Pb0,5 | CW604N | C33500 | |
Z11 | CuZn35Pb1 | CW600N | C34000 | |
Z12 | CuZn35Pb2 | CW601N | C34200 / C34500 | |
Z14 | CuZn37Pb2* | CW606N | C35300 | |
Z21 | CuZn38Pb2 | CW608N | C35000 | C3713 |
Z23 | CuZn36Pb3 | CW603N | C36000 | |
Z33 | CuZn39Pb3 | CW614N | C38500 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
LV3 | CuNi9Sn* | - | C72700 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
M59 | - | CW510L | - |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
S34 | - | - | C67340 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
B44 | CuSn4Pb4Zn4 | CW456K | C54400 |
ecoline: Lead-free solutions

Wieland ecoline is our answer to enable your future business: the lead-free product line fulfills your individual needs for an efficient production and future oriented product development. And is, of course, compliant with the latest requirements of legislative directives on lead-free materials.
Learn more about
Wieland ecoline
Materials
Material designation
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
LV3 | CuNi9Sn* | - | C72700 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
M58 | CuZn42 | CW510L | - |
M59 | - | CW510L | - |
M60 | CuZn40 | CW509L | C27450 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
N59 | CuNi9Zn41FeMn* | - | - |
Contact person
Get in touch - Our experts for rods and sectional rods
Barbara Zwerg,
Sales office and field service Germany/Switzerland
Wieland Metalix
+41 32 617 39 49
barbara.zwerg@wieland.com
Werner Marti,
Leader inside service/Management
Wieland Metalix
+41 32 617 39 32
werner.marti@wieland.com
Cyril Vulin,
Head of Sales W-CH
Wieland Metalix
+41 32 617 39 57
cyril.vulin@wieland.com
Laura Boos,
Sales inside service
Wieland Metalix
+41 32 617 39 46
laura.boos@wieland.com
Barbara Cataldo-Kühne,
Sales inside service
Wieland Metalix
+41 32 617 39 44
barbara.cataldo@wieland.com
Marc Niggli,
Product Manager
Wieland Metalix
+41 32 617 39 31
marc.niggli@wieland.com
Related topics
This might be of interest to you

Already know your search term? Then go ahead and use our full text search. You will get a list of all relevant results.