Wieland Kupral Kft.

Do you need finished parts according to drawings? Here, too, we are your competent supplier.

We offer you for example:

• electrodes and other accessories for resistance welding technology
• input material for die-cast pistons and finished pistons
• semi-finished products made of highly conductive copper-based materials for tool and mould construction
• parts made of refractory metals

Components from Elmedur

Our Elmedur materials are particularly versatile. We produce parts from them according to drawings - and of course also individual parts. All according to your wishes and requirements.

Electrodes

No matter which electrodes you need: Among our large selection of standard electrodes you will find the right one for your purposes. We manufacture electrodes from hardenable copper materials, which are very hard and at the same time highly conductive. They are ideal for applications in which high electrical currents are transmitted under high mechanical loads.

Components made of high-melting metals

From our refractory metals molybdenum, TZM, tungsten and tantalum we manufacture parts according to drawings as well as individual parts. As the metals are very easy to process, they are ideal for a wide range of applications.

For a more sustainable future in construction.

With its 100 % share of recycled material, the cuprolife copper tube makes a sustainable difference, and thus makes a significant contribution to the advancement of building and construction as well as building services. 

Every cuprolife tube from Wieland is manufactured in keeping with the mass balance approach – using a process with 100 % recycled copper. As the starting point when verifying cuprolife, TÜV SÜD tested the procedure for calculating the 100 % recycled content*.

The new standard in copper tubes: cuprolife^®.

Thanks to cutting-edge manufacturing techniques, cuprolife tubes exceed even the highest requirements. Optimal efficiency and reliability are guaranteed along with an exceptional service life. cuprolife tubes are universally usable. cuprolife is permanently in stock and can be supplied in any size from 6 x 1 mm to 159 x 3 mm.

Fields of application

• Domestic hot and cold water supply
• Heating
• Gas
• Liquid gas
• Heating oil / biofuel oil B10
• Solar systems
• Rainwater
• Industrial compressed air
• Sprinkler systems
• Firefighting systems

Technical features

• 100 % recycled copper*
• Design according to EN 1057, quality assured
• Made of pure copper Cu-DHP
• With quality mark and DVGW certification: DV-7204AU2106 (6 to 159 mm outside diameter)
• Universal use in a range of finely differentiated dimensions
• Optimum availability and compatibility with a wide range of fittings
• Maximum operating temperature at 10 bar operating pressure: 250 °C (applies to dimensions up to DN 150)
• Fire resistance: EN 13501-1 – A1 (nonflammable)
• Dimensions according to DVGW GW 392 (6 to 159 mm) with closed tube ends
• For optimal drinking water hygiene

*Mass balance approach, based on ISO 14021, verified by TÜV SÜD.

Learn more

Reliable for all areas of home installation

For many years, installers have been relying on SANCO branded copper tubes. The tubes are very reliable, suitable for all areas of domestic installation and have more than proven their worth in practice. Whether drinking water supply (hot and cold), heating systems, oil, gas and liquid gas supplies as well as thermal solar systems: Wieland SANCO tubes are always the right choice and, of course, covered by the relevant regulations.

Technical features

• Patented manufacturing process: SANCO tubes are significantly better than required by standards and regulations.
• Design according to EN 1057, quality assured
• Made of pure copper Cu-DHP
• With quality mark and DVGW certification:
  DV-7204AU2106 (12 to 159 mm outside diameter).
• Universal use in a range of finely differentiated dimensions
• Optimum availability and compatibility with a wide range of fittings
• Maximum operating temperature: 250 °C 
• Fire resistance: EN 13501-1-A1 (non-flammable)
• Dimensions according to DVGW GW 392 (12 to 159 mm) with closed tube ends
• For optimal drinking water hygiene
• Wide range of certifications available, such as Kitemark, Afnor, KIWA, DVGW and many others

Fields of application

• Domestic hot and cold water supply
• Heating systems
• Gas and oil services for heating and cooking
• Solar systems
• Rainwater
• Industrial compressed air
• Sprinkler and Fire-fighting-systems
• Further applications in consultation with our technical advisory service

WICU

WICU tubes a have a mill-applied protective coating. They are therefore suitable for concealed installation under plaster or in environments with an aggressive atmosphere, and for installation outdoors, either above or below ground. 

Technical features

• Design according to EN 1057, quality assured
• Made of pure copper Cu-DHP
• With quality mark and DVGW certification:
• DV-7204AU2106 (12 to 42 mm outside diameter).
• Protective coating conforms to EN 13349 and DIN 30672-1 class B
• Reduction of condensation
• Fire resistance: EN 13501-1-E
• Color of coating: light gray
• Temperature range up to 100 °C

Fields of application

• Domestic hot and cold water supply
• Heating systems
• Gas and oil services for heating and cooking
• Rainwater
• Industrial compressed air
• Further applications in consultation with our technical advisory service

WICU Flex

WICU Flex is a plumbing tube with a flexible coating for rapid installation. The coating consists of closed-cell PE foam covered by a structured protective film. WICU Flex is supplied in coils for rapid connection to manifolds etc. and for underfloor installations.

Technical properties

• Design according to EN 1057, quality assured
• Made of pure copper Cu-DHP
• With quality mark and DVGW certification:
  DV-7204AU2106 (12 to 22 mm outside diameter)
• CFC/FKW-free polyethylene foam (PE) with a
• PE structural foil
• Sound insulation: DIN 4109 - A1
• Thermal conductivity of the insulation layer according to DIN 52613:
  = 0.040 W/mK at 40 °C
• Fire resistance: N 13401-1-E
• Color of coating: white
• Temperature application range: up to 100 °C

Fields of application 

• Connecting tubes
• Domestic hot and cold water supply
• Central heating systems

cuprotherm CTX

cuprotherm CTX tubes are copper tubes with a firmly adhering coating. Due to their structure, they are very easy to process and are characterized by a flexibility so far unknown for metal tubes. CTX tubes are a technically high-quality and at the same time economically interesing solution: They offer an attractive price per meter for copper tubes at stable conditions, and are therefore also convincing in terms of reliability in planning. 

Technical features

• Flexible copper tube made of pure copper Cu-DHP
• Temper: soft R220 according to EN 1057 with firmly adhering coating made of PE-RT 
• Fire behavior EN 13501-1, class E
• Color of the coating: white, similar to RAL 9010 (pure white)
• Temperature application range: up to 100 °C

Fields of application

• Heating
• Cooling
• Radiator connection
• Rainwater harvesting systems
• Ground collectors (water/glycol)
• Concrete core activation

cuprotherm.plus

cuprotherm is Europe's most frequently installed copper underfloor heating system, and for good reason. The outstandingly long service life of cuprotherm copper tubes will make you forget about surface heating for decades after it has been installed. Due to the highest thermal donductivity in technical materials, efficient use for this application is also good for the wallet in the long run. 

The orange coating provides mechanical and chemical protection from the outside and allows the cuprotherm tube to expand unhindered in length when the temperature changes. 

Technical properties

• Design according to EN 1057
• Fire resistance: EN 13501-1-E
• Building material class: DIN 4102 - A1
• With quality mark
• Diffusion rate: 0.00 mg/m²*d after 50 years

Fields of application

• Surface heating and cooling
• Wall heating
• Industrial surfaceheating
• Sports floor heating

cuprotherm.blank

cuprotherm is Europe's most frequently installed copper underfloor heating system, and that for good reasons. The oustandingly long service life of cuprotherm copper tubes will make you forget about surface heating for decades after it has been installed. Due to the highest thermal conductivity in technical materials, efficient use for this application is also good for the wallet in the long run. 

The bare copper tube also withstands high temperatures and is therefore the first choice in applications with mastic asphalt.

Technical properties

• Design according to EN 1057
• Fire resistance: EN 13501-1-A1 (non-flammable)
• With quality mark
• Diffusion rate: 0.00 mg/m²*d after 50 years

Fields of application

• Underfloor heating with mastic asphalt screed
• Wall heating with clay plaster

cuprofrio.plus

Wieland branded copper tubes cuprofrio and cuprofrio.plus have a high level of internal cleanliness due to the individually closed tube ends and are suitable for refrigerants according to EN 12735-1.
cuprofrio tubes can be easily processed on site and conform to high quality standards with their extremely clean and dry inner surface. Close tube ends ensure the required quality even during storage and transportation.

learn more

cuprofrio.plus

cuprofrio.plus-tubes are insulated on the outside, which prevents nearly all water condensation on the outer surface of the tube.

Your benefits

• clean and dry inside surface
• standard dimensions available from stock
• good processing, easy joining, very easy to unwind and bend
• resistant, colour-fast insulation ensures consistent material properties in all weather conditions
• prevention of condensation water through insulating layer
• supplier traceability through signature
• compliance with Pressure Equipment Directive 97/23/EC

Fields of application

cuprofrio is suitable for technical gases and liquids, for example in

• chillers
• air-conditioning and refrigeration units
• heat exchangers

learn more

cuprofrio – refrigeration

Wieland branded copper tubes cuprofrio and cuprofrio.plus have a high level of internal cleanliness due to the individually closed tube ends and are suitable for refrigerants according to EN 12735-1.
cuprofrio tubes can be easily processed on site and conform to high quality standards with their extremely clean and dry inner surface. Close tube ends ensure the required quality even during storage and transportation.

learn more

Your benefits

• clean and dry inside surface
• closed tube ends in order to maintain cleanliness
• supplier traceability through signature
• standard dimensions available from stock
• good processing, easy joining, very easy to unwind and bend
• tube quality according to EN 12735-1
• compliance with Pressure Equipment Directive 2014/68/EU

Fields of application

cuprofrio is suitable for technical gases and liquids, for example in

• chillers
• air-conditioning and refrigeration units
• heat exchangers

Forms of delivery

• Coils (pancakes)
• Straight lengths of 5 m

learn more

cupromed – medical gas supply

The seamless drawn cupromed copper tube is used for refrigeration/air conditioning as well as for medical gas supply units according to EN ISO 7396-1. cupromed tubes in straight lengths meet the requirements according to EN 13348 and those according to EN 12735-1.

Your benefits

• clean and dry inside surface
• closed tubes ends keep the surface clean
• supplier traceability through signature
• standard dimensions available from stock
• good processing, easy joining, very easy to unwind and bend
• standard tube quality according to EN 12735-1
• compliance with Pressure Equipment Directive 2014/68/EU
• Requirements according to the PED/Pressure Equipment Directive 2014/68/EU

Fields of applications

cupromed is suitable for the transportation of technical gases and liquids as well as medical gas and vacuum in

• medical gas supply units
• refrigeration and air conditioning units

K65 - Sustainable and efficient

two keywords that have had a decisive impact on our time and have gained in relevance in recent years, especially in refrigeration. Increased environmental awareness in society and industry has therefore led to a kind of renaissance of natural refrigerants, especially CO2. Wieland supports this turnaround with a tube system that meets the high requirements of CO2 as a refrigerant.

Wieland K65 tubes have been designed for CO2 applications in the commercial field, especially that of supermarket refrigeration systems. Wieland K65 alloy provides the mechanical strength high enough to withstand the high operating pressures of CO2. At the same time, K65 tubes have outstanding processing properties, similar to those of standard copper (Cu-DHP/C12200). 
Wieland K65 tubes are offered from stock in two pressure ranges, 80 bar and 120 bar, and in dimensions ranging from 3/8” up to 2-1/8”.

All Wieland K65 tubes are available in the soft condition (R300/O61) to ensure excellent bending / flaring and collaring properties.

Other dimensions and delivery forms such as level wound coils are offered for industrial processing, in particular manufacturing of CO2 heat exchangers (evaporator/gas cooler).

More K65 products in other categories

• K65 Industrial tubes smooth
• K65 Industrial tubes innergooved

Your benefits

• Cost reduction through weight reduction
• Proven processing technology: brazing instead of welding!
• Economical and safe installation of regrigeration systems with up to 120 bar operation pressure
• Excellent heat transfer
• Design according to EN 14276 

Typical applications

• Pipelines for refrigeration systems, in particular for CO2 refrigerant, with an operation pressure of up to 120 bar

Technical properties

• Material: K65
• Operation pressure: 80 bar and 120 bar
• Condition: soft R300/O61
• Delivery form: straight lengths of 5 m
• Available dimensions: 9,52 - 53,97 mm (3/8" - 2-1/8")
• Tube ends: closed
• Usual standards: EN 14276 / EN 12735-1 

Further information

• K65 Brochure
• Saxonia Brazing recommendation
• K65 Website

cuprogeo – geothermal energy

The seamless drawn cuprogeo tube is used for geothermal energy production. cuprogeo is designed for the use of refrigerants and gases for direct evaporation in heat pumps. The advantage of this application is that high performance can be achieved with suitable heat pumps.

Your benefits

• clean and dry inner surface
• supplier traceability through signature
• tube protected by an outside surface coating
• standard tube quality according to EN 12735-1
• requirements comply with the Pressure Equipment Directive 2014/68/EU

Fields of application

• geothermal energy
• refrigeration equipment and heat exchangers
• geothermal heat pumps with direct evaporation

FRIGOTEC Plus tubes are jacketed copper tubes with high internal cleanliness and closed ends for use in refrigeration and air conditioning. Factory applied PE insulation is 9 mm and provides continuous meter marking.
Material CU-DHP, condition R220.

FRIGOTEC Plus copper tubes are subject to a constricted carbon residue on the inner surface of the tube in accordance with EN 12735-1. The range of dimensions includes 6 × 1 mm to 22 × 1 mm and 1/4" to 7/8". The pipes are ideally connected with >B< solder fittings. The applicable standards and guidelines must be observed during planning, processing and operation. The sheathing complies with fire class E of EN 13501-1 and has a vapor diffusion >7000 μ.

Standards: EN 12735-1 | ASTM B280

Learn more
Refrigeration and air conditioning Piping systems

FRIGOTEC® tubes are seamless drawn copper tubes for use in refrigeration and air conditioning. The inner surface of the tubes has a special degree of cleanliness. The tube ends are already sealed at the factory.

FRIGOTEC® tubes are subject to a constricted carbon residue on the inner tube surface in accordance with EN 12735-1. Due to the range of dimensions from 6 × 1 mm to 108 × 2.5 mm, systems of any size can be realized. The pipes are ideally connected with >B< solder fittings. In addition, the FRIGOTEC tubes in R250 and R290 condition in the dimensions 8 × 1 mm to 64 × 1 mm comply with EN 13348 for medical gases.

The applicable standards and guidelines must be observed during planning, processing and operation.