Rods and sectional rods

     

    The right alloy, geometry, and strength – precise and efficient: simply Wieland. Rods and profiled rods are used in a wide range of applications, extending over forged sanitary fittings, lock cylinders and turned parts for machine construction. You can choose from a virtually unlimited number of sizes and geometries.

     

    Special alloys tailored to your specific application are recommended by our Applications Engineering experts. 




    Our range of products

    Our rods and sectional rods at a glance.

    Wieland Manner

    This is our Wieland Manner product portfolio.

    Rods

    Sectional rod

    Machining

    WICONNEC®

    ecoline®: Lead-free solutions

    Precision continuous casting

    Forging Stock



    Materials

    Wieland EN Designation EN No. ASTM UNS-No.
    K08 Cu-OFE CW009A C10100
    K12 Cu-HCP CW021A C10300
    K18/K32 Cu-ETP CW004A C11000
    K18/K32 Cu-ETP CW004A C11000
    K20/K21/K28 Cu-DHP CW024A C12200
    K30 Cu-OF CW008A C10200

    Characteristics and properties of products / materials in this document are generic and provided solely for general information purposes. Any statement regarding the suitability of products / materials for certain types of applications is based on typical requirements and does not replace expert advice. Wieland disclaims all liability arising from any reliance on these documents.

    Wieland manufactures solid and hollow copper sections in a wide range of sizes. Featuring contours close to the final geometry, these sections help you obtain your finished parts in just a few operations. Together with you, we develop complex sections of copper from the draft to the initial prototypes to series production.



    Materials

    Wieland EN Designation EN No. ASTM UNS-No.
    K12 Cu-HCP CW021A C10300
    K16 Cu-ETP1 CW003A -
    K18/K32 Cu-ETP CW004A C11000
    K20/K21/K28 Cu-DHP CW024A C12200
    K30 Cu-OF CW008A C10200
    KA1 CuAg0,10P CW016A -

    Characteristics and properties of products / materials in this document are generic and provided solely for general information purposes. Any statement regarding the suitability of products / materials for certain types of applications is based on typical requirements and does not replace expert advice. Wieland disclaims all liability arising from any reliance on these documents.


    Materials

    The closer the input stock approaches the end product, the higher the efficiency of downstream machining. The Wieland E5006 precision hexagon rod fulfils these expectations in a quite special way: It presents the precise outer contours of a workpiece. Unlike machined multiedge cross sections, drawn edged rods are characterised by extremely smooth, plane, and compacted surfaces. Moreover, they lend the workpiece a continuous grain structure of high impact toughness. Obvious material savings are yet another benefit.

    Learn more
    W5006 precision brass rods


    Characteristics and properties of products / materials in this document are generic and provided solely for general information purposes. Any statement regarding the suitability of products / materials for certain types of applications is based on typical requirements and does not replace expert advice. Wieland disclaims all liability arising from any reliance on these documents.

    The Wieland WICONNEC brand offers a range of copper materials in the form of rods and wires that are ideal for machined sockets and pins for plug connectors. This material portfolio also offers brass materials in addition to specially developed copper alloys for complex turned plug connectors.

    WICONNEC



    Materials

    Wieland EN Designation EN No. ASTM UNS-No.
    K41 CuNi1Pb1P* - C19150 / C19160
    K44 CuNi1Pb0.6P* - C19140 / C19150
    KC1 CuPb1P CW113C C18700
    eco KS2® CuSP CW114C C14700

    Characteristics and properties of products / materials in this document are generic and provided solely for general information purposes. Any statement regarding the suitability of products / materials for certain types of applications is based on typical requirements and does not replace expert advice. Wieland disclaims all liability arising from any reliance on these documents.

    Wieland ecoline is our answer to enable your future business: the lead-free product line fulfills your individual needs for an efficient production and future oriented product development. And is, of course, compliant with the latest requirements of legislative directives on lead-free materials.

    Learn more about
    Wieland ecoline


    Characteristics and properties of products / materials in this document are generic and provided solely for general information purposes. Any statement regarding the suitability of products / materials for certain types of applications is based on typical requirements and does not replace expert advice. Wieland disclaims all liability arising from any reliance on these documents.

    From Europe’s largest copper alloy foundry in Vöhringen/Iller (Germany), we can offer you far in excess of a hundred different copper materials. These include not only a wide range of continuous castings like tubes and rods, but also shaped rods and sections of complex geometries. At the same time, our flexibility ensures the prompt realisation of your special custom wishes.



    Materials

    Wieland EN Designation EN No. ASTM UNS-No. Dimensions Temper
    G05 CuSn5Zn5Pb5-C-GC CC491K -
    G07/G08 CuSn7Zn4Pb7-C CC493K - 10 – 354 mm
    G07/G08 CuSn7Zn4Pb7-C CC493K - 17 – 65 mm
    G07/G08 CuSn7Zn4Pb7-C CC493K - 22 × 22 bis 203 × 203 mm
    G07/G08 CuSn7Zn4Pb7-C CC493K - 22 × 12 bis 312 × 52 mm extruded/drawn
    G07/G08 CuSn7Zn4Pb7-C CC493K - 10 - 404 mm cast
    G07/G08 CuSn7Zn4Pb7-C CC493K - 22x22 bis 113x113 mm cast
    G07/G08 CuSn7Zn4Pb7-C CC493K - 32x12 to 123x23 mm cast
    G07/G08 CuSn7Zn4Pb7-C CC493K -
    G07/G08 CuSn7Zn4Pb7-C CC493K - 22×22– 203×203 mm cast
    G07/G08 CuSn7Zn4Pb7-C CC493K - 217–65 mm cast
    G07/G08 CuSn7Zn4Pb7-C CC493K - 22×12– 312×52 mm cast
    G10 CuSn10-C CC480K -
    G12/G13 CuSn12-C CC483K - 10 – 354 mm
    G12/G13 CuSn12-C CC483K - 22 × 22 bis 203 × 203 mm
    G12/G13 CuSn12-C CC483K - 22 × 12 bis 312 × 52 mm extruded/drawn
    G12/G13 CuSn12-C CC483K - cast
    G12/G13 CuSn12-C CC483K -
    G12/G13 CuSn12-C CC483K - 22×22– 203×203 mm cast
    G12/G13 CuSn12-C CC483K - 22×12– 312×52 mm cast
    G12/G13 CuSn12-C CC483K -
    G21 CuSn10Pb10-C-GC CC495K -
    G22 CuSn7Pb15-C CC496K -
    G91 CuSn11Pb2-C-GC CC482K - 10 – 303 mm
    G91 CuSn11Pb2-C-GC CC482K - on request
    G91 CuSn11Pb2-C-GC CC482K - extruded/drawn
    G91 CuSn11Pb2-C-GC CC482K - cast
    G91 CuSn11Pb2-C-GC CC482K -
    GA1 CuSn11Pb2-C-GC CC481K -
    GB1 CuSn12Ni2-C CC484K -
    GD1 CuSn5Zn5Pb2-C-GC CC499K -
    eco GS1® CuSn4Zn2PS-C-GC* - -

    Characteristics and properties of products / materials in this document are generic and provided solely for general information purposes. Any statement regarding the suitability of products / materials for certain types of applications is based on typical requirements and does not replace expert advice. Wieland disclaims all liability arising from any reliance on these documents.

    Wieland hot stamping rods 

    Good forging results can be obtained only when all links in the process chain have been matched to each other to the optimal effect. With Wieland hot stamping rods you are offered a forging stock which comprehensively fulfils these requirements. Your benefits: uniform dark surface for reproducible processing properties, tight diameter tolerances in the drawn size range, and hence precise configuration of the slug weight.



    Materials

    Wieland EN Designation EN No. ASTM UNS-No. Dimensions Temper
    Z31/Z41/Z48 CuZn40Pb2 CW617N C38000
    Z32/Z33 CuZn39Pb3 CW614N C38500 Ø 16 – 140 mm M
    Z32/Z33 CuZn39Pb3 CW614N C38500

    Characteristics and properties of products / materials in this document are generic and provided solely for general information purposes. Any statement regarding the suitability of products / materials for certain types of applications is based on typical requirements and does not replace expert advice. Wieland disclaims all liability arising from any reliance on these documents.



    Contact person

    Get in touch - Our experts for rods and sectional rods



    Foto Claus Reinholdt Claus Reinholdt
    Sales
    Wieland Manner
    +45 36 77 14 01







    Welcome to Wieland. I am your virtual assistant.

    Do you need help finding information?

    Already know your search term? Then go ahead and use our full text search. You will get a list of all relevant results.