Products

Leading NE-Metal supplier of the hungarian industry

Wieland Kupral Kft.


We have translated excerpts of this website …

A Wieland Kupral Kft-t ABM Kupral Kft.-ként ismertük az elmúlt évtizedekben. Több mint 25 éves tapasztalattal, megbízható gyártói háttérrel hosszú távú partnerként támogatjuk vevőinket kiváló minőségű réz és rézötvözetű termékeinkkel, sokrétű raktárkészletünkkel, hozzáértő kollégáinkkal.

A III. kerületben lévő, mintegy 1500 m2 nagyságú telephelyünkön több, mint 20 fajta rézötvözetű félkész terméket tartunk raktáron. A Wieland cégcsoport részeként a világ egyik legnagyobb és legkorszerűbb gyárában készült termékekkel első számú beszállítói vagyunk a világ kisebb és nagyobb cégeinek egyaránt. Kollégáink sokéves tapasztalattal és műszaki ismeretekkel segítik a megfelelő anyag kiválasztását. Épületgépészeti, klímatechnikai csövek, fittingek, forraszanyagok vörösréz áramvezető sínek, bronz rudak, csövek, sárgaréz rudak, különleges sárgarezek, alumíniumbronzok, nemesíthető ötvözetek, lemezek, szalagok és akár késztermékek forgalmazása azonnal, raktárról, a vevőink igényeinek megfelelően! Ezt bizonyítja a vevőinkkel kialakított sikeres és hosszú távú együttműködéseink legyenek akár autóipari beszállítók, megmunkáló központok, elektromos és elektronikus összeszerelő üzemek vagy akár gépészeti, élelmiszeripari vagy orvosi szektorok szolgáltató, fejlesztő vállalkozásai.

EN ISO 9001 minőségügyi rendszerünk nemzetközi elvárásoknak is megfelelnek, aminek segítségével partnereink biztosan a legjobb minőségű termékeket kaphatják. Jövőbetekintő, folyamatos fejlesztéseinkkel magasabb hozzáadott értéket teremtünk Önöknek – a vásárlóinknak.


  • Vágási szolgáltatás (szalagfűrész és körfűrészgépek)
  • Rövid szállítási határidők

Organization




Wieland Kupral Kft. Törökko utca 5–7
1037 Budapest
Hungary (UTC+1)
+36 1 436 7150
+36 1 436 7153
Send email
Nyitvatartási idő
Hétfő – Csütörtök:
07.30 Óra – 15.30 Óra

Péntek:
07.30 Óra – 13.30 Óra
Áruátvétel
Hétfő – Csütörtök:
07.30 Óra – 15.30 Óra

Péntek:
07.30 Óra – 13.30 Óra
Plan route



Adatok

1500

Több mint to kiszállított termék

1500

m2 raktár

18

munkatárs





Metal Information

Current metal prices

Officials (Prompt)
31.05.2023
Cu (Settlement)
8,017.00 USD/to
Zn (Settlement)
2,228.00 USD/to
EUR (Bid)
1.06500 USD

Products

Our products at a glance

Product categories

CaroTec plunger tip system

CaroVac plunger tip system

CaroMag magnesium plunger tip system

CaroLub lubrication devices

CaroShot Sleeve system

CaroRod plunger rod system

Fittings

Finished parts

Round rod

Square rod

Hexagonal rod

Rectangular rod

Sectional rod

ECOBRASS

ecoline®: Lead-free solutions

Sheets and Plates

Smooth industrial tubes

Plumbing tubes

Refrigeration and medical gas tubes

Wire

 

 

Optimizes your standard pressure die casting on conventional die casting machines

  • Low wear plunger tip concept
  • Very long service lifetime
  • Selectable cooling capacity to optimize cycle times

 

Advantages

  • Much longer lifetime compared to conventional plunger tips
  • Body, clamping nut, threaded connection can be used several times
  • Wear parts can be reworked to a smaller diameter
  • With environmentally friendly beryllium and cobalt-free slide bushings
  • Optimized tempering by forced cooling
  • The modular construction system ensures flexibility even for casting intermediate sizes
  • Reduced set-up costs and downtime due to longer service life of the plunger tips

Product brochure CARO®TEC

 

Services

  • Service center for plunger tip reworking and assembling
  • Advisory service, process development and designing
  • Comprehensive stock

 

 


 

 

Optimizes vacuum die casting on HPDC

  • Developed for structural and vacular die casting
  • Low wear plunger tip concept for shot sleeves
  • Very long service life

 

Advantages

  • Highest evacuation level without additional sealing of shotsleeve or plunger rod
  • No system-related maintenance or downtimes
  • Applicable on vacuum and conventional DCM (mould sealing recommended)
  • Compatible with any shotsleeve
  • Closed pressure ring concept
  • Only copper parts are in contact with shotsleeve

Product brochure CARO®VAC

 

Services

  • Service center for plunger tip reworking and assembling
  • Advisory service, process development and designing
  • Comprehensive stock

 

 


 

 

Optimizes magnesium die casting on vacuum or conventional HPDC

  • Developed for magnesium and structural casting
  • Plunger-tip concept for the protection of the shot sleeves
  • Extremely high lifetime

 

Advantages

  • Highest evacuation grades without additional sealing of shotsleeve or plunger rod
  • No system-related maintenance times or lifetime
  • Applicable on vacuum and conventional DCM
  • Compatible with any shotsleeve

 

Services

  • Service center for plunger tip reworking and assembling
  • Advisory service, process development and designing
  • Comprehensive stock

 

 


Efficient minimal quantity lubrication by plunger rod.

  • The minimal quantity lubrication is applied through lubrication ring on plunger rod
  • Depending on the required lubricant (viscosity) our devices can be equipped with the appropriate components
  • A wide range of lubricants from various manufacturers can be applied

 

CARO®LUB 2.1

  • Developed for structural casting
  • Improved casting quality
  • Significantly lower emissions and pollution
  • Optionally with remote maintenance
  • For minimal quantity lubrication with low-viscosity lubricants

Product brochure CARO®LUB 2.1

 

 

CARO®LUB 3.1

  • Developed for structural casting
  • Improved casting quality
  • Significantly lower emissions and pollution
  • Possibility of remote maintenance
  • For minimum quantity lubrication with highly viscosity lubricants
  • Individually adjustable lubricant distribution
  • Exactly adjustable lubrication quantities in ml

Product brochure CARO®LUB 3.1

 

 

CARO®LUB 4.0

  • Developed for structural casting and industry 4.0
  • For highly viscous lubricants used for minimal quantity lubrication
  • Improved casting quality
  • Significantly lower emissions and pollution
  • Individually adjustable lubricant distribution
  • Exactly adjustable lubricant quantities in ml
  • Application of state-of-the-art and high-quality components from Siemens

Product brochure CARO®LUB 4.0

 

 


Made of high-performance alloys for longer lifetime.

  • Multiple lifetime extension of shotsleeve
  • Simple assembling and dismantling without mould changing

Product brochure CaroShotsleeve

 

 

CaroShotsleeve

  • Lifetime extension due to sleeves and thermo regulation
  • Specifically for low iron aluminum alloys
  • Reduces pre-damage risk of hot aluminium
  • Optional with quick change sleeve

 

 

Carosleeve

  • Different alloys and treatments available
  • Specifically for low iron aluminum alloys
  • Very good wear resistance in filling-area (Hot Spot)
  • Lifetime extension of shotsleeve
  • Fast & easy assembly and dismantling at DCM

 

Services

  • Advisory service, process development and designing
  • Provider for die-casting technology e.g. plunger tips, plunger rods, quick-coupling systems, vacuum-casting for structural parts and magnesium parts
  • Service center for reworking of shot sleeve and assembling

 

 


Custom-fit in high-quality rods for any machine type, optional with quick coupling system

  • Manufacture of plunger rods for all machine types
  • Change from plunger rods with adapter to CaroTec and CaroVac system
  • Optional with quick coupling unit

CaroRod with integrated lubrication in combination with CaroLub spraying devices enable:

  • Improved casting quality
  • Minimal lubricant consumption
  • Significantly lower emissions

Product brochure CaroTec & CaroRod plunger rod system

Product brochure CaroVac & CaroRod plunger rod system

 

Guide elements on CaroRod

  • For easy change of plunger tip and easy adjustment
  • For safety when overriding the chamber
  • Load relief of plunger tips and coupling

 

Services

  • Service center for reconstruction and repair
  • Advisory service, process development and designing
  • System supplier in die-casting technology

 

 


Solder fitting
For connoisseurs of the plumbing and heating trade, the Conex | Bänninger >B< is a trademark that has stood for safety, quality and innovative products since 1909.

Fittings made of copper from Conex | Bänniger of the 5000 series: this material is oxygen-free and contains a copper mass fraction of at least 99.90%. It has excellent soft and hard solderability.

Gunmetal fittings from Conex | Bänniger of the 4000 and 3000 series: the gunmetal alloy of the cast fittings fully complies with the requirements of the new EN 1982 and can therefore be used for drinking water in accordance with ÖNORM
B 5014-3. The alloy offers the highest possible protection and has good soft and hard solderability.

CONEX clamping ring connectors
CONEX clamping ring connectors belong to the group of metal-sealing smooth pipe connections and consist of a fitting body, clamping ring and union nut. The tubes to be connected are pushed through the pre-assembled connection into the fitting body as far as it will go and the union nut is tightened by hand. The union nuts are tightened with commercially available tools or with the CONEX wrench. In the process, the clamping ring deforms and forms the metallic sealing connection between the tube and the fitting.

>B< Press Fitting and >B< Press Gas Fitting
With the current >B< Press connection technology made of material copper and gunmetal, we offer another highly economical installation technology. >B< Press Fittings series P4000 and P5000 have been specially developed for the field of plumbing and heating installation and can also be used for many other applications. The >B< Press Fittings range includes over 300 different items in copper and gunmetal materials. The >B< Press Gas Fittings series PG4000 and PG5000 have the quality mark certificate no. G 2.692 for gas.  

>B< Oyster
The high quality transition coupling >B< Oyster made of gunmetal allows a quick, clean and economical assembly of all screwed components with internal thread. Application in the fields of drinking water, rainwater, heating, oil-free compressed air and in industry. The cold and energy-independent connection technology is particularly suitable for installation in areas at risk of fire. >B<-Oysters are detachable and reusable.



Wieland EN Designation EN No. ASTM UNS-No. Dimensions Temper
K18 Cu-ETP CW004A C11000 5 – 150 mm R250/R300/D/M

Wieland EN Designation EN No. ASTM UNS-No.
K60 CuCr1Zr CW106C C18150

Wieland EN Designation EN No. ASTM UNS-No.
K60 CuCr1Zr CW106C C18150

Wieland EN Designation EN No. ASTM UNS-No.
K18 Cu-ETP CW004A C11000
K18 Cu-ETP CW004A C11000

Wieland manufactures solid and hollow copper sections in a wide range of sizes. Featuring contours close to the final geometry, these sections help you obtain your finished parts in just a few operations. Together with you, we develop complex sections of copper from the draft to the initial prototypes to series production.

Wieland EN Designation EN No. ASTM UNS-No.
B12 CuSn8P CW459K C52100

Wieland recognized the potential of environmentally friendly, lead-free machining brass at a very early date, and adopted the pioneering role in Europe by developing ECOBRASS. This proved to be a farsighted course into the future. Today, ECOBRASS is marketed worldwide over a cooperation network and available, even in smaller quantities, from trade partners. We also market this material under the name “CUPHIN” for sanitary products.


Wieland ecoline is our answer to enable your future business: the lead-free product line fulfills your individual needs for an efficient production and future oriented product development. And is, of course, compliant with the latest requirements of legislative directives on lead-free materials.

Learn more about
Wieland ecoline


We can offer you a wide range of materials, geometries, and surface qualities to choose from. Many geometries are available from our sheets stores.

Wieland EN Designation EN No. ASTM UNS-No.
K12 Cu-HCP CW021A C10300
K12 Cu-HCP CW021A C10300
K18 Cu-ETP CW004A C11000
K18 Cu-ETP CW004A C11000

Available materials

WielandENEN-Nr.UNS
K08Cu-OFECW009AC10100
K12Cu-HCPCW021AC10300
K20 / K21 / K28Cu-DHPCW024AC12200
K30Cu-OFCW008AC10200
K65CuFe2PCW107CC19400
L10CuNi10Fe1MnCW352HC70600
L30CuNi30Mn1FeCW354HC71500

 

Delivery forms

  • Level wound coils:  100 kg, 150 kg, 300 kg, 530 kg
  • Straight lengths
  • Rings

 


Available materials

WielandENEN-Nr.UNS
K20 / K21 / K28Cu-DHPCW024AC12200

 


Available materials

WielandENEN-Nr.UNS
K20 / K21 / K28Cu-DHPCW024AC12200
K65CuFE2PCW107CC19400

 


Wieland can offer you wire and sectional  made of a wide range of materials: wrought copper alloys and alloys extending from brass, both with and without lead, to bronze, to German silver. And in combination with material properties, sizes, and geometries, our delivery portfolio can meet virtually every requirement. Simply contact us!








Letöltések

Információs anyagok és fontos dokumentumok letöltése


8 result/s
Brochures
fittings-3000-4000-5000_HU.pdf

260.77 KiB

Download

Brochures
B-Press-Gas.pdf

Connex | Bänninger

3.4 MiB

Download

Brochures
Series-3000.pdf

Connex | Bänninger

2.45 MiB

Download

Brochures
CaroVac-CaroRod.pdf

Best Team for high vacuum die casting and structural parts | wieland caro

970.9 KiB

Download

Brochures
CaroTec-CaroRod.pdf

A perfect pairing for standards & low vacuum casting | wieland caro

1.16 MiB

Download

Terms and conditions
Allgemeine-Einkaufsbedingungen.pdf

421.47 KiB

Download

Terms and conditions
General-Terms-and-Conditions-of-Purchase.pdf

48.67 KiB

Download

Terms and conditions
General-Terms-and-Conditions.pdf

450.45 KiB

Download




Kapcsolattartás

Keressen bennünket – Az Ön kapcsolattartója Wieland Kupral Kft. - hu



Foto Dr. Lukács Sándor Dr. Lukács Sándor
Managing Director
Wieland Kupral
+36 1 436 7150

Foto Farkas János Farkas János
Logistics
Wieland Kupral
+36 1 436 7150

Foto Csók Katalin Csók Katalin
Administration | Accounting
Wieland Kupral
+36 1 436 7150

Foto Sándor István Sándor István
Sales Plumbing tubes
Wieland Kupral
+36 1 436 7755

Foto Tibai Veronika Tibai Veronika
Sales - Industrial alloys
Wieland Kupral
+36 1 436 7757

Foto Deáki Szilvia Deáki Szilvia
Sales - Industrial alloys
Wieland Kupral
+36 1 436 7766

Foto Fischl Andrea Fischl Andrea
Sales industrial alloys
Wieland Kupral
+36 1 436 7756

Foto Kegyes Jenő Kegyes Jenő
Head of Warehouse & Logistics
Wieland Kupral
+36 1 436 7159

Foto Viktor Magyar Viktor Magyar
Head of sales and purchase
Wieland Kupral
+36 1436 7759

Kein Foto vorhanden Gabor Vizhanyo
Extruded Products
Wieland Kupral
+36 1 436 7155

Foto Petra Hanzel Petra Hanzel
Sales representative
Wieland Kupral
+36 1 436-7153




Álláslehetőségek

Kezdje a karrierjét a Wieland Kupral Kft. - hu





Welcome to Wieland. I am your virtual assistant.

Do you need help finding information?