Wieland Kupral Kft.
A III. kerületben lévő, mintegy 1500 m2 nagyságú telephelyünkön több, mint 20 fajta rézötvözetű félkész terméket tartunk raktáron. A Wieland cégcsoport részeként a világ egyik legnagyobb és legkorszerűbb gyárában készült termékekkel első számú beszállítói vagyunk a világ kisebb és nagyobb cégeinek egyaránt. Kollégáink sokéves tapasztalattal és műszaki ismeretekkel segítik a megfelelő anyag kiválasztását. Épületgépészeti, klímatechnikai csövek, fittingek, forraszanyagok vörösréz áramvezető sínek, bronz rudak, csövek, sárgaréz rudak, különleges sárgarezek, alumíniumbronzok, nemesíthető ötvözetek, lemezek, szalagok és akár késztermékek forgalmazása azonnal, raktárról, a vevőink igényeinek megfelelően! Ezt bizonyítja a vevőinkkel kialakított sikeres és hosszú távú együttműködéseink legyenek akár autóipari beszállítók, megmunkáló központok, elektromos és elektronikus összeszerelő üzemek vagy akár gépészeti, élelmiszeripari vagy orvosi szektorok szolgáltató, fejlesztő vállalkozásai.
EN ISO 9001 minőségügyi rendszerünk nemzetközi elvárásoknak is megfelelnek, aminek segítségével partnereink biztosan a legjobb minőségű termékeket kaphatják. Jövőbetekintő, folyamatos fejlesztéseinkkel magasabb hozzáadott értéket teremtünk Önöknek – a vásárlóinknak.
- Vágási szolgáltatás (szalagfűrész és körfűrészgépek)
- Rövid szállítási határidők
Organization
1037 Budapest
Hungary (UTC+1)
07.30 Óra – 15.30 Óra
Péntek:
07.30 Óra – 13.30 Óra
07.30 Óra – 15.30 Óra
Péntek:
07.30 Óra – 13.30 Óra
Adatok
Több mint to kiszállított termék
m2 raktár
munkatárs
Metal Information
Current metal prices
Products
Our products at a glance
Product categories
Headline
Back to product overviewCaroBull & CaroBull-V plunger tip system
CaroTec plunger tip system
CaroVac plunger tip system
CaroMag magnesium plunger tip system
CaroLub lubrication devices
CaroShotsleeve system
CaroRod plunger rod system
Fittings
Finished parts
Rods
Sectional rod
WICONNEC®
ecoline®: Lead-free solutions
Precision continuous casting
Strip
Sheets and Plates
Smooth industrial tubes
Innergrooved industrial tubes
Plumbing tubes
Refrigeration and medical gas tubes
Tubes
Wire
Optimizes the standard die casting
- Designed for flexible use on any DCM
- Suitable for standard and vacuum products (flexible ring system)
Advantages
- Easy changeover from solid tip to system plunger tip system
- Vacuum: Flexible change of glide bushing to circlips for vacuum application
- Can be fitted on existing plunger rods
- Proven ring system
- Closed pressure ring (prevents honing, no contact to shotsleeve)
- Soft Slide bushing in contact to shotsleeve
- Ring (spare parts) change in a few simple steps directly at the DGM
- Plunger tip change in a few steps due to bayonet lock (patented)
Product brochure CaroBull & CaroBull-V
Services
- Service center for plunger tip reworking and assembling
- Advisory service, process development and designing
- Comprehensive stock
Optimizes your standard pressure die casting on conventional die casting machines
- Low wear plunger tip concept
- Very long service lifetime
- Selectable cooling capacity to optimize cycle times
Advantages
- Much longer lifetime compared to conventional plunger tips
- Body, clamping nut, threaded connection can be used several times
- Wear parts can be reworked to a smaller diameter
- With environmentally friendly beryllium and cobalt-free slide bushings
- Optimized tempering by forced cooling
- The modular construction system ensures flexibility even for casting intermediate sizes
- Reduced set-up costs and downtime due to longer service life of the plunger tips
Services
- Service center for plunger tip reworking and assembling
- Advisory service, process development and designing
- Comprehensive stock
Optimizes vacuum die casting on HPDC
- Developed for structural and vacular die casting
- Low wear plunger tip concept for shot sleeves
- Very long service life
Advantages
- Highest evacuation level without additional sealing of shotsleeve or plunger rod
- No system-related maintenance or downtimes
- Applicable on vacuum and conventional DCM (mould sealing recommended)
- Compatible with any shotsleeve
- Closed pressure ring concept
- Only copper parts are in contact with shotsleeve
Services
- Service center for plunger tip reworking and assembling
- Advisory service, process development and designing
- Comprehensive stock
Optimizes magnesium die casting on vacuum or conventional HPDC
- Developed for magnesium and structural casting
- Plunger-tip concept for the protection of the shot sleeves
- Extremely high lifetime
Advantages
- Highest evacuation grades without additional sealing of shotsleeve or plunger rod
- No system-related maintenance times or lifetime
- Applicable on vacuum and conventional DCM
- Compatible with any shotsleeve
Services
- Service center for plunger tip reworking and assembling
- Advisory service, process development and designing
- Comprehensive stock
Efficient minimal quantity lubrication by plunger rod.
- The minimal quantity lubrication is applied through lubrication ring on plunger rod
- Depending on the required lubricant (viscosity) our devices can be equipped with the appropriate components
- A wide range of lubricants from various manufacturers can be applied
CARO®LUB 2.1
- Developed for structural casting
- Improved casting quality
- Significantly lower emissions and pollution
- Optionally with remote maintenance
- For minimal quantity lubrication with low-viscosity lubricants
CARO®LUB 3.1
- Developed for structural casting
- Improved casting quality
- Significantly lower emissions and pollution
- Possibility of remote maintenance
- For minimum quantity lubrication with highly viscosity lubricants
- Individually adjustable lubricant distribution
- Exactly adjustable lubrication quantities in ml
CARO®LUB 4.0
- Developed for structural casting and industry 4.0
- For highly viscous lubricants used for minimal quantity lubrication
- Improved casting quality
- Significantly lower emissions and pollution
- Individually adjustable lubricant distribution
- Exactly adjustable lubricant quantities in ml
- Application of state-of-the-art and high-quality components from Siemens
Made of high-performance alloys for longer lifetime.
- Multiple lifetime extension of shotsleeve
- Simple assembling and dismantling without mould changing
Product brochure CaroShotsleeve
CaroShotsleeve
- Lifetime extension due to sleeves and thermo regulation
- Specifically for low iron aluminum alloys
- Reduces pre-damage risk of hot aluminium
- Optional with quick change sleeve
Carosleeve
- Different alloys and treatments available
- Specifically for low iron aluminum alloys
- Very good wear resistance in filling-area (Hot Spot)
- Lifetime extension of shotsleeve
- Fast & easy assembly and dismantling at DCM
Services
- Advisory service, process development and designing
- Provider for die-casting technology e.g. plunger tips, plunger rods, quick-coupling systems, vacuum-casting for structural parts and magnesium parts
- Service center for reworking of shot sleeve and assembling
Custom-fit in high-quality rods for any machine type, optional with quick coupling system
- Manufacture of plunger rods for all machine types
- Change from plunger rods with adapter to CaroTec and CaroVac system
- Optional with quick coupling unit
CaroRod with integrated lubrication in combination with CaroLub spraying devices enable:
- Improved casting quality
- Minimal lubricant consumption
- Significantly lower emissions
Product brochure CaroTec & CaroRod plunger rod system
Product brochure CaroVac & CaroRod plunger rod system
Guide elements on CaroRod
- For easy change of plunger tip and easy adjustment
- For safety when overriding the chamber
- Load relief of plunger tips and coupling
Services
- Service center for reconstruction and repair
- Advisory service, process development and designing
- System supplier in die-casting technology
Solder fitting
For connoisseurs of the plumbing and heating trade, the Conex | Bänninger >B< is a trademark that has stood for safety, quality and innovative products since 1909.
Fittings made of copper from Conex | Bänniger of the 5000 series: this material is oxygen-free and contains a copper mass fraction of at least 99.90%. It has excellent soft and hard solderability.
Gunmetal fittings from Conex | Bänniger of the 4000 and 3000 series: the gunmetal alloy of the cast fittings fully complies with the requirements of the new EN 1982 and can therefore be used for drinking water in accordance with ÖNORM
B 5014-3. The alloy offers the highest possible protection and has good soft and hard solderability.
CONEX clamping ring connectors
CONEX clamping ring connectors belong to the group of metal-sealing smooth pipe connections and consist of a fitting body, clamping ring and union nut. The tubes to be connected are pushed through the pre-assembled connection into the fitting body as far as it will go and the union nut is tightened by hand. The union nuts are tightened with commercially available tools or with the CONEX wrench. In the process, the clamping ring deforms and forms the metallic sealing connection between the tube and the fitting.
>B< Press Fitting and >B< Press Gas Fitting
With the current >B< Press connection technology made of material copper and gunmetal, we offer another highly economical installation technology. >B< Press Fittings series P4000 and P5000 have been specially developed for the field of plumbing and heating installation and can also be used for many other applications. The >B< Press Fittings range includes over 300 different items in copper and gunmetal materials. The >B< Press Gas Fittings series PG4000 and PG5000 have the quality mark certificate no. G 2.692 for gas.
>B< Oyster
The high quality transition coupling >B< Oyster made of gunmetal allows a quick, clean and economical assembly of all screwed components with internal thread. Application in the fields of drinking water, rainwater, heating, oil-free compressed air and in industry. The cold and energy-independent connection technology is particularly suitable for installation in areas at risk of fire. >B<-Oysters are detachable and reusable.
Do you need finished parts according to drawings? Here, too, we are your competent supplier.
We offer you for example:
- electrodes and other accessories for resistance welding technology
- input material for die-cast pistons and finished pistons
- semi-finished products made of highly conductive copper-based materials for tool and mould construction
- parts made of refractory metals
Components from Elmedur
Our Elmedur materials are particularly versatile. We produce parts from them according to drawings - and of course also individual parts. All according to your wishes and requirements.
Electrodes
No matter which electrodes you need: Among our large selection of standard electrodes you will find the right one for your purposes. We manufacture electrodes from hardenable copper materials, which are very hard and at the same time highly conductive. They are ideal for applications in which high electrical currents are transmitted under high mechanical loads.
Components made of high-melting metals
From our refractory metals molybdenum, TZM, tungsten and tantalum we manufacture parts according to drawings as well as individual parts. As the metals are very easy to process, they are ideal for a wide range of applications.
Materials
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
K18/K32 | Cu-ETP | CW004A | C11000 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
K54 | CuNi2SiCr* | - | C81540 |
K60 | CuCr1Zr | CW106C | C18150 |
K96 | CuCo1Ni1Be | CW103C | - |
Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. |
---|---|---|---|---|
Z21 | CuZn38Pb2 | CW608N | C3713 | |
Z31/Z41/Z48 | CuZn40Pb2 | CW617N | C38000 | |
Z32/Z33 | CuZn39Pb3 | CW614N | C38500 |
Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. |
---|---|---|---|---|
M37/M38 | CuZn37 | CW508L | C27200 | C2720 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
S40 | CuZn37Mn3Al2PbSi | CW713R | C67420 |
eco SW1® | CuZn21Si3P | CW724R | C69300 |
eco SZ2® | CuZn36Si1P | CW726R | C68370 |
eco SZ3® | CuZn40SiP | - | - |
eco SZ4® | CuZn42 | CW510L | C28500 |
eco SZ5® | CuZn40 | CW509L | C27450 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
B09/B10 | CuSn8 | CW453K | C52100 |
B12/B21 | CuSn8P/CuSn8 | CW459K/CW453K | C52100 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
U33 | CuAl10Ni5Fe4 | CW307G | C63000 |
U39 | Cu Al10Fe3Mn2 | CW306G | - |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
A22 | AlMgSi | AW-6060 | - |
A32 | AlSi1MgMn | AW-6082 | - |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
B12/B21 | CuSn8P/CuSn8 | CW459K/CW453K | C52100 |
The Wieland WICONNEC brand offers a range of copper materials in the form of rods and wires that are ideal for machined sockets and pins for plug connectors. This material portfolio also offers brass materials in addition to specially developed copper alloys for complex turned plug connectors.
Learn more about
Wieland ecoline
From Europe’s largest copper alloy foundry in Vöhringen/Iller (Germany), we can offer you far in excess of a hundred different copper materials. These include not only a wide range of continuous castings like tubes and rods, but also shaped rods and sections of complex geometries. At the same time, our flexibility ensures the prompt realisation of your special custom wishes.
Materials
Wieland | EN Designation | EN No. | ASTM UNS-No. | Dimensions |
---|---|---|---|---|
G05 | CuSn5Zn5Pb5-C-GC | CC491K | - | |
G07/G08 | CuSn7Zn4Pb7-C | CC493K | - | |
G10 | CuSn10-C | CC480K | - | |
G12/G13 | CuSn12-C | CC483K | - | 10 – 354 mm |
G12/G13 | CuSn12-C | CC483K | - | 22 × 22 bis 203 × 203 mm |
G12/G13 | CuSn12-C | CC483K | - | 22 × 12 bis 312 × 52 mm |
G12/G13 | CuSn12-C | CC483K | - | 13 - 130 mm; on request |
G12/G13 | CuSn12-C | CC483K | - | 10–354 mm |
G12/G13 | CuSn12-C | CC483K | - | 22×22– 203×203 mm |
G12/G13 | CuSn12-C | CC483K | - |
Wieland | EN Designation | EN No. | ASTM UNS-No. | Temper |
---|---|---|---|---|
K12 | Cu-HCP | CW021A | C10300 | R220/R240/R290/R360 F20/F25/F33 |
K12 | Cu-HCP | CW021A | C10300 | |
K18 | Cu-ETP | CW004A | C11000 | |
K18 | Cu-ETP | CW004A | C11000 |
Wieland | EN Designation | EN No. | ASTM UNS-No. | Dimensions | Temper |
---|---|---|---|---|---|
Z30 | CuZn39Pb2 | CW612N | C37700 | 670 × 1340 and 600 × 2000 format; thicknesses from 0.8 to 30 mm | hardened |
Z30 | CuZn39Pb2 | CW612N | C37700 | 0.3 – 120 mm | R360/R490/R560 F36/F49/F59 |
Z30 | CuZn39Pb2 | CW612N | C37700 |
Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. | Dimensions | Temper |
---|---|---|---|---|---|---|
M38 | CuZn37 | CW508L | C27200 | C2720 | 0.2 –10 mm | R300/R350/R480/R550 F30/F37/F44/F54 |
M38 | CuZn37 | CW508L | C27200 | C2720 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
U33 | CuAl10Ni5Fe4 | CW307G | C63000 |
Available materials
Wieland | EN | EN-Nr. | UNS |
K20 / K21 / K28 | Cu-DHP | CW024A | C12200 |
L10 | CuNi10Fe1Mn | CW352H | C70600 |
K65 | CuFe2P | CW107C | C19400 |
Materials
For a more sustainable future in construction.
With its 100 % share of recycled material, the cuprolife copper tube makes a sustainable difference, and thus makes a significant contribution to the advancement of building and construction as well as building services.
Every cuprolife tube from Wieland is manufactured in keeping with the mass balance approach – using a process with 100 % recycled copper. As the starting point when verifying cuprolife, TÜV SÜD tested the procedure for calculating the 100 % recycled content*.
The new standard in copper tubes: cuprolife®.
Thanks to cutting-edge manufacturing techniques, cuprolife tubes exceed even the highest requirements. Optimal efficiency and reliability are guaranteed along with an exceptional service life. cuprolife tubes are universally usable. cuprolife is permanently in stock and can be supplied in any size from 6 x 1 mm to 159 x 3 mm.
Fields of application
- Domestic hot and cold water supply
- Heating
- Gas
- Liquid gas
- Heating oil / biofuel oil B10
- Solar systems
- Rainwater
- Industrial compressed air
- Sprinkler systems
- Firefighting systems
Technical features
- 100 % recycled copper*
- Design according to EN 1057, quality assured
- Made of pure copper Cu-DHP
- With quality mark and DVGW certification: DV-7204AU2106 (6 to 159 mm outside diameter)
- Universal use in a range of finely differentiated dimensions
- Optimum availability and compatibility with a wide range of fittings
- Maximum operating temperature at 10 bar operating pressure: 250 °C (applies to dimensions up to DN 150)
- Fire resistance: EN 13501-1 – A1 (nonflammable)
- Dimensions according to DVGW GW 392 (6 to 159 mm) with closed tube ends
- For optimal drinking water hygiene
*Mass balance approach, based on ISO 14021, verified by TÜV SÜD.
Reliable for all areas of home installation
For many years, installers have been relying on SANCO branded copper tubes. The tubes are very reliable, suitable for all areas of domestic installation and have more than proven their worth in practice. Whether drinking water supply (hot and cold), heating systems, oil, gas and liquid gas supplies as well as thermal solar systems: Wieland SANCO tubes are always the right choice and, of course, covered by the relevant regulations.
Technical features
- Patented manufacturing process: SANCO tubes are significantly better than required by standards and regulations.
- Design according to EN 1057, quality assured
- Made of pure copper Cu-DHP
- With quality mark and DVGW certification:
DV-7204AU2106 (12 to 159 mm outside diameter). - Universal use in a range of finely differentiated dimensions
- Optimum availability and compatibility with a wide range of fittings
- Maximum operating temperature: 250 °C
- Fire resistance: EN 13501-1-A1 (non-flammable)
- Dimensions according to DVGW GW 392 (12 to 159 mm) with closed tube ends
- For optimal drinking water hygiene
- Wide range of certifications available, such as Kitemark, Afnor, KIWA, DVGW and many others
Fields of application
- Domestic hot and cold water supply
- Heating systems
- Gas and oil services for heating and cooking
- Solar systems
- Rainwater
- Industrial compressed air
- Sprinkler and Fire-fighting-systems
- Further applications in consultation with our technical advisory service
WICU
WICU tubes a have a mill-applied protective coating. They are therefore suitable for concealed installation under plaster or in environments with an aggressive atmosphere, and for installation outdoors, either above or below ground.
Technical features
- Design according to EN 1057, quality assured
- Made of pure copper Cu-DHP
- With quality mark and DVGW certification:
- DV-7204AU2106 (12 to 42 mm outside diameter).
- Protective coating conforms to EN 13349 and DIN 30672-1 class B
- Reduction of condensation
- Fire resistance: EN 13501-1-E
- Color of coating: light gray
- Temperature range up to 100 °C
Fields of application
- Domestic hot and cold water supply
- Heating systems
- Gas and oil services for heating and cooking
- Rainwater
- Industrial compressed air
- Further applications in consultation with our technical advisory service
WICU Flex
WICU Flex is a plumbing tube with a flexible coating for rapid installation. The coating consists of closed-cell PE foam covered by a structured protective film. WICU Flex is supplied in coils for rapid connection to manifolds etc. and for underfloor installations.
Technical properties
- Design according to EN 1057, quality assured
- Made of pure copper Cu-DHP
- With quality mark and DVGW certification:
DV-7204AU2106 (12 to 22 mm outside diameter) - CFC/FKW-free polyethylene foam (PE) with a
- PE structural foil
- Sound insulation: DIN 4109 - A1
- Thermal conductivity of the insulation layer according to DIN 52613:
= 0.040 W/mK at 40 °C - Fire resistance: N 13401-1-E
- Color of coating: white
- Temperature application range: up to 100 °C
Fields of application
- Connecting tubes
- Domestic hot and cold water supply
- Central heating systems
cuprotherm CTX
cuprotherm CTX tubes are copper tubes with a firmly adhering coating. Due to their structure, they are very easy to process and are characterized by a flexibility so far unknown for metal tubes. CTX tubes are a technically high-quality and at the same time economically interesing solution: They offer an attractive price per meter for copper tubes at stable conditions, and are therefore also convincing in terms of reliability in planning.
Technical features
- Flexible copper tube made of pure copper Cu-DHP
- Temper: soft R220 according to EN 1057 with firmly adhering coating made of PE-RT
- Fire behavior EN 13501-1, class E
- Color of the coating: white, similar to RAL 9010 (pure white)
- Temperature application range: up to 100 °C
Fields of application
- Heating
- Cooling
- Radiator connection
- Rainwater harvesting systems
- Ground collectors (water/glycol)
- Concrete core activation
cuprotherm.plus
cuprotherm is Europe's most frequently installed copper underfloor heating system, and for good reason. The outstandingly long service life of cuprotherm copper tubes will make you forget about surface heating for decades after it has been installed. Due to the highest thermal donductivity in technical materials, efficient use for this application is also good for the wallet in the long run.
The orange coating provides mechanical and chemical protection from the outside and allows the cuprotherm tube to expand unhindered in length when the temperature changes.
Technical properties
- Design according to EN 1057
- Fire resistance: EN 13501-1-E
- Building material class: DIN 4102 - A1
- With quality mark
- Diffusion rate: 0.00 mg/m²*d after 50 years
Fields of application
- Surface heating and cooling
- Wall heating
- Industrial surfaceheating
- Sports floor heating
cuprotherm.blank
cuprotherm is Europe's most frequently installed copper underfloor heating system, and that for good reasons. The oustandingly long service life of cuprotherm copper tubes will make you forget about surface heating for decades after it has been installed. Due to the highest thermal conductivity in technical materials, efficient use for this application is also good for the wallet in the long run.
The bare copper tube also withstands high temperatures and is therefore the first choice in applications with mastic asphalt.
Technical properties
- Design according to EN 1057
- Fire resistance: EN 13501-1-A1 (non-flammable)
- With quality mark
- Diffusion rate: 0.00 mg/m²*d after 50 years
Fields of application
- Underfloor heating with mastic asphalt screed
- Wall heating with clay plaster
Materials
FRIGOTEC® tubes are seamless drawn copper tubes for use in refrigeration and air conditioning. The inner surface of the tubes has a special degree of cleanliness. The tube ends are already sealed at the factory.
FRIGOTEC® tubes are subject to a constricted carbon residue on the inner tube surface in accordance with EN 12735-1. Due to the range of dimensions from 6 × 1 mm to 108 × 2.5 mm, systems of any size can be realized. The pipes are ideally connected with >B< solder fittings. In addition, the FRIGOTEC tubes in R250 and R290 condition in the dimensions 8 × 1 mm to 64 × 1 mm comply with EN 13348 for medical gases.
The applicable standards and guidelines must be observed during planning, processing and operation.
FRIGOTEC Plus tubes are jacketed copper tubes with high internal cleanliness and closed ends for use in refrigeration and air conditioning. Factory applied PE insulation is 9 mm and provides continuous meter marking.
Material CU-DHP, condition R220.
FRIGOTEC Plus copper tubes are subject to a constricted carbon residue on the inner surface of the tube in accordance with EN 12735-1. The range of dimensions includes 6 × 1 mm to 22 × 1 mm and 1/4" to 7/8". The pipes are ideally connected with >B< solder fittings. The applicable standards and guidelines must be observed during planning, processing and operation. The sheathing complies with fire class E of EN 13501-1 and has a vapor diffusion >7000 μ.
Standards: EN 12735-1 | ASTM B280
cuprofrio – refrigeration
Wieland branded copper tubes cuprofrio and cuprofrio.plus have a high level of internal cleanliness due to the individually closed tube ends and are suitable for refrigerants according to EN 12735-1.
cuprofrio tubes can be easily processed on site and conform to high quality standards with their extremely clean and dry inner surface. Close tube ends ensure the required quality even during storage and transportation.
learn more
Your benefits
- clean and dry inside surface
- closed tube ends in order to maintain cleanliness
- supplier traceability through signature
- standard dimensions available from stock
- good processing, easy joining, very easy to unwind and bend
- tube quality according to EN 12735-1
- compliance with Pressure Equipment Directive 2014/68/EU
Fields of application
cuprofrio is suitable for technical gases and liquids, for example in
- chillers
- air-conditioning and refrigeration units
- heat exchangers
Forms of delivery
- Coils (pancakes)
- Straight lengths of 5 m
cuprofrio.plus
Wieland branded copper tubes cuprofrio and cuprofrio.plus have a high level of internal cleanliness due to the individually closed tube ends and are suitable for refrigerants according to EN 12735-1.
cuprofrio tubes can be easily processed on site and conform to high quality standards with their extremely clean and dry inner surface. Close tube ends ensure the required quality even during storage and transportation.
learn more
cuprofrio.plus
cuprofrio.plus-tubes are insulated on the outside, which prevents nearly all water condensation on the outer surface of the tube.
Your benefits
- clean and dry inside surface
- standard dimensions available from stock
- good processing, easy joining, very easy to unwind and bend
- resistant, colour-fast insulation ensures consistent material properties in all weather conditions
- prevention of condensation water through insulating layer
- supplier traceability through signature
- compliance with Pressure Equipment Directive 97/23/EC
Fields of application
cuprofrio is suitable for technical gases and liquids, for example in
- chillers
- air-conditioning and refrigeration units
- heat exchangers
cupromed – medical gas supply
The seamless drawn cupromed copper tube is used for refrigeration/air conditioning as well as for medical gas supply units according to EN ISO 7396-1. cupromed tubes in straight lengths meet the requirements according to EN 13348 and those according to EN 12735-1.
Your benefits
- clean and dry inside surface
- closed tubes ends keep the surface clean
- supplier traceability through signature
- standard dimensions available from stock
- good processing, easy joining, very easy to unwind and bend
- standard tube quality according to EN 12735-1
- compliance with Pressure Equipment Directive 2014/68/EU
- Requirements according to the PED/Pressure Equipment Directive 2014/68/EU
Fields of applications
cupromed is suitable for the transportation of technical gases and liquids as well as medical gas and vacuum in
- medical gas supply units
- refrigeration and air conditioning units
cuprogeo – geothermal energy
The seamless drawn cuprogeo tube is used for geothermal energy production. cuprogeo is designed for the use of refrigerants and gases for direct evaporation in heat pumps. The advantage of this application is that high performance can be achieved with suitable heat pumps.
Your benefits
- clean and dry inner surface
- supplier traceability through signature
- tube protected by an outside surface coating
- standard tube quality according to EN 12735-1
- requirements comply with the Pressure Equipment Directive 2014/68/EU
Fields of application
- geothermal energy
- refrigeration equipment and heat exchangers
- geothermal heat pumps with direct evaporation
K65 - Sustainable and efficient
two keywords that have had a decisive impact on our time and have gained in relevance in recent years, especially in refrigeration. Increased environmental awareness in society and industry has therefore led to a kind of renaissance of natural refrigerants, especially CO2. Wieland supports this turnaround with a tube system that meets the high requirements of CO2 as a refrigerant.
Wieland K65 tubes have been designed for CO2 applications in the commercial field, especially that of supermarket refrigeration systems. Wieland K65 alloy provides the mechanical strength high enough to withstand the high operating pressures of CO2. At the same time, K65 tubes have outstanding processing properties, similar to those of standard copper (Cu-DHP/C12200).
Wieland K65 tubes are offered from stock in two pressure ranges, 80 bar and 120 bar, and in dimensions ranging from 3/8” up to 2-1/8”.
All Wieland K65 tubes are available in the soft condition (R300/O61) to ensure excellent bending / flaring and collaring properties.
Other dimensions and delivery forms such as level wound coils are offered for industrial processing, in particular manufacturing of CO2 heat exchangers (evaporator/gas cooler).
More K65 products in other categories
Your benefits
- Cost reduction through weight reduction
- Proven processing technology: brazing instead of welding!
- Economical and safe installation of regrigeration systems with up to 120 bar operation pressure
- Excellent heat transfer
- Design according to EN 14276
Typical applications
- Pipelines for refrigeration systems, in particular for CO2 refrigerant, with an operation pressure of up to 120 bar
Technical properties
- Material: K65
- Operation pressure: 80 bar and 120 bar
- Condition: soft R300/O61
- Delivery form: straight lengths of 5 m
- Available dimensions: 9,52 - 53,97 mm (3/8" - 2-1/8")
- Tube ends: closed
- Usual standards: EN 14276 / EN 12735-1
Further information
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
K20/K21/K28 | Cu-DHP | CW024A | C12200 |
Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. |
---|---|---|---|---|
M37/M38 | CuZn37 | CW508L | C27200 | C2720 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
S40 | CuZn37Mn3Al2PbSi | CW713R | C67420 |
S40 | CuZn37Mn3Al2PbSi | CW713R | C67420 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
B12/B21 | CuSn8P/CuSn8 | CW459K/CW453K | C52100 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
A22 | AlMgSi | AW-6060 | - |
Letöltések
Információs anyagok és fontos dokumentumok letöltése
260.77 KiB
3.4 MiB
2.45 MiB
970.9 KiB
1.18 MiB
421.47 KiB
48.67 KiB
450.45 KiB
Kapcsolattartás
Keressen bennünket – Az Ön kapcsolattartója Wieland Kupral Kft. - hu
Dr. Lukács Sándor
Managing Director
Wieland Kupral
+36 1 436 7150
Send email
Farkas János
Logistics
Wieland Kupral
+36 1 436 7150
Send email
Csók Katalin
Administration | Accounting
Wieland Kupral
+36 1 436 7150
Send email
Sándor István
Sales Plumbing tubes
Wieland Kupral
+36 1 436 7755
Send email
Tibai Veronika
Sales - Industrial alloys
Wieland Kupral
+36 1 436 7757
Send email
Deáki Szilvia
Sales - Industrial alloys
Wieland Kupral
+36 1 436 7766
Send email
Fischl Andrea
Sales industrial alloys
Wieland Kupral
+36 1 436 7756
Send email
Kegyes Jenő
Head of Warehouse & Logistics
Wieland Kupral
+36 1 436 7159
Send email
Viktor Magyar
Head of sales and purchase
Wieland Kupral
+36 1436 7759
Send email
Gabor Vizhanyo
Extruded Products
Wieland Kupral
+36 1 436 7155
Send email
Wieland Kupral Kft.
Törökkő utca 5-7
1037 Budapest
Hungary
+36 1 436 7150
kupral@wieland.com
Managing Director:
Dr. Sándor Lukács
Registered office:
Budapest
Company no.:
01-09-070819
Tax no.:
10429288-2-41
Álláslehetőségek
Kezdje a karrierjét a Wieland Kupral Kft. - hu
Unleash potential.
Already know your search term? Then go ahead and use our full text search. You will get a list of all relevant results.