Wieland Śląskie Metale Sp. z o.o.
ul. Wypoczynkowa 34
Bielsko-Biała, 43-382
Poland
(UTC+1)
Wieland Śląskie Metale Sp. z o.o.
Wieland Śląskie Metale, founded in 2008, is one of the leading suppliers of semi-finished products in copper and copper alloys as well as special alloys. The stock programme comprises rods, wires, tubes, strips, flat bars and sheets made of brass and copper as well as special alloys such as Ecobrass, Elmedur and bronzes.
- Modern warehouse with wide range of products
- Quick response to customer requests
Organization
Business hours
Monday - Friday
7:00 am- 4:00 pm
7:00 am- 4:00 pm
Goods acceptance times
Monday - Friday
6:00 am - 3:00 pm
6:00 am - 3:00 pm
Facts
2008
founded
1000
m² storage area
11
employees
Metal Information
Current metal prices
Officials (Prompt)
08.10.2024
Cu (Settlement)
9,619.00 USD/to
Zn (Settlement)
3,083.00 USD/to
EUR (Bid)
1.09250 USD
Products
Our products at a glance
Product categories
Headline
Back to product overviewEnhanced surface tubes
Low-finned tubes
Medium-high finned tubes
High finned tubes
Safety tubes
Coaxial heat exchanger WKE | WKC
Wieland WRK
Wieland safety heat exchanger
Finned tube heat exchanger WRW
Customized heat exchangers
Fittings
Ingots
Rods
Sectional rod
Machining
ecoline®: Lead-free solutions
Forging Stock
Strip
Hot-dip tin coated strip
Multi-gauge strip
Sheets and Plates
Smooth industrial tubes
Innergrooved industrial tubes
Plumbing tubes
Refrigeration and medical gas tubes
Wire
Optimised heat transfer for your shell-and-tube heat exchanger
The enhanced surface tubes made by Wieland Thermal Solutions have been optimized for use as condenser or evaporator tubes in shell-and-tube heat exchangers used in the refrigeration and air-conditioning industry. These can be designed to be much more compact, saving you energy, installation space, and materials.
Your advantages at a glance
- Significantly higher heat transfer coefficients than smooth or low finned tubes
- More compact and lighter heat exchangers
- Significantly reduced filling quantities of e.g. refrigerants
- Highest efficiencies due to smallest temperature differences
- Precise thermal design with ThermalS
Optimized heat transfer for your shell-and-tube heat exchanger
The enhanced surface tubes made by Wieland Thermal Solutions have been optimized for use as condenser or evaporator tubes in shell-and-tube heat exchangers used in the refrigeration and air-conditioning industry. These can be designed to be much more compact, saving you energy, installation space and materials.
Our Materials
We offer you a broad portfolio of materials and can expand our offerings at any time to meet your specific needs regarding thermal conductivity, mechanical properties, or corrosion resistance. Enhanced surface tubes made by Wieland Thermal Solutions are already available in copper, copper-nickel, brass, carbon steel, stainless steel, and titanium.
You can find more product information here
* Material not standardized in EN
For extreme efficiency in a variety of applications
Low-finned tubes are a reliable solution for controlling the temperature of gases and liquids, or for evaporating and condensing refrigerants. Thanks to their larger heat transfer surface area, they offer considerable potential to save in terms of materials and fill volumes. The wide range of dimensions offered by Wieland Thermal Solutions makes these products perfect for a broad scope of applications in the refrigeration and air conditioning industry, for oil/gas coolers in machinery and plant engineering, and for intermediate vapor superheaters in process engineering.
Your advantages at a glance
- Proven solution in a wide range of applications
- Increased heat transfer surface compared to plain tubes
- Material savings due to reduced tube length
- Filling quantity reduction due to higher efficiency
Our Materials
We offer you a broad portfolio of materials and can expand our offering at any time to meet your specific needs regarding thermal conductivity, mechanical properties, or corrosion resistance. Low-finned tubes made by Wieland Thermal Solutions are already available in copper, copper-nickel, brass, carbon steel, stainless steel, and titanium.
You can find more product information here
GEWA-K/KS
S/T Trufin & TurboChil in Steel
S/T Trufin & TurboChil in Titanium
* Material not standardized in EN
For compact coils and bent shapes
Medium-high finned tubes feature a significantly larger heat transfer surface area compared to plain tubes. They are ideal for compact and high-performance coils and shell-and-tube heat exchangers. Wieland medium-high finned tubes are a proven and robust solution for water heaters, storage tanks, refrigerant condensers, oil coolers, gas coolers or safety heat exchangers and more.
Your advantages at a glance
- High surface enlargement compared to plain tubes
- Ideal for compact and robust heat exchangers
- Excellent bending properties and processability
- Availability of various dimensions, internal structures and materials
Our Materials
We offer the widest range of material in the industry and can extend it on request in case of special requirements for heat conductivity, mechanical properties or corrosion resistance. Medium-high finned tubes from Wieland Thermal Solutions are available in copper, copper-nickel, aluminium and carbon steel as well as in stainless steel in limited range.
You can find more information here
* Material not standardized in EN
For highest efficiency in controlling the temperature of gases and liquids
High-finned tubes have a much greater outer surface area than smooth tubes. This allows for particularly compact designs. Thanks to their high, thin fins, these tubes perform particularly well in the heating and cooling of liquids and gases, making them an excellent choice for applications in heating technology, as well as in machinery and plant engineering.
Your advantages at a glance
- Highest surface enlargement compared to plain tubes (up to factor 18)
- Enables particularly compact and robust designs
- Available in straight lengths or as coiled heat exchanger
- Also available as bimetallic version GEWA-HB
Our Materials
We offer you a broad portfolio of materials and can expand our offering at any time to meet your specific needs regarding thermal conductivity, mechanical properties, or corrosion resistance. High-finned GEWA-H tubes made by Wieland Thermal Solutions are already available in copper, copper-nickel and aluminum.
In the GEWA-HB tube materials like carbon steel, stainless steel, titanium or almost any other material like brass and nickel can be used for the inner tube.
You can find more information here
* Material not standardized in EN
For absolutely reliable media separation with best thermal contact
Safety tubes are used for economical and safe heat transfer. The double wall tubes feature defined leakage paths for the absolutely reliable separation of fluids. For your individual requirements concerning fluid dynamics, we decide on the most suitable surface structure. Our GEWA-safe tubes are a reliable and safe choice for applications such as the direct heating of drinking water using critical fluids as in heating technology or for controlling the temperature of sensitive chemical processes.
GEWA-safe tubes are available in copper and copper alloys and provide safe drinking water heating in heat pumps, heat recovery systems, heat transfer stations and are used for transformer cooling.
Your advantages at a glance
- Reliable | Trust in reliable media separation through the double-tube system with defined leakage spaces.
- Efficient | Use direct and safe heat transfer of the media involved.
- Highest system availability | Detect leaks at an early stage and eliminate them during scheduled maintenance.
- Compact and economical | Reduce material costs and equipment requirements.
Our Materials
We offer you a broad portfolio of materials and can expand our offering at any time to meet your specific needs regarding thermal conductivity, mechanical properties, or corrosion resistance. GEWA-safe double wall tubes are available in copper and copper-nickel.
Read more
Heat exchanger for direct condensation in domestic hot water
Heat recovery from grey water
You can find more information here
* Material not standardized in EN
In coaxial heat exchangers, fluids are ideally conducted in counter-flow directions. The Wieland WKE and WKC series have been optimized for the condensation or evaporation of refrigerants and are used in reciprocating chillers and heat pumps.
Your advantages at a glance
- High specific power due to optimized inner tubes
- Flow guidance in counterflow
- Insensitive to frost
- Low fouling tendency
- Long service life
- Reversible operation possible
- Standard designs from stock
You can find more information here
Data sheet WKC | WKE
Our wholesaler for standard heat exchanger
Calculate your coaxial heat exchanger directly online:
ThermalS
* Material not standardized in EN
WRK finned tube heat exchangers are suitable for efficient direct condensation and evaporation in heat pump buffer tanks. The inner grooved surface of the used finned tubes optimize the heat transfer. Thus highest COP-values are possible even with smallest temperature differences.
Your advantages at a glance
- Efficient: Highest COP values due to direct integration of the heat exchanger in the storage tank
- Filling volume optimized: Smallest refrigerant volumes due to compact design
- Easy handling: Easy replacement and maintenance
You can find more information here
* Material not standardized in EN
Hygienic and compact: Wieland Safety Heat Exchangers are ideal for the direct heating of water for domestic use by condensing the refrigerant within the tank. The double-walled model offers additional safety against contamination and complies with the guidelines for ensuring the quality of drinking water.
4 good reasons for the Wieland safety heat exchanger series
- Cost-effective | Benefit from higher performance with the lowest refrigerant and material consumption!
- Efficient | Achieve the highest COP values according to DIN EN 16147 by installing the heat exchanger directly in the storage tank.
- Safe | Rely on absolutely reliable media separation through double tubes
- Easy handling | Reduce your effort for installation and replacement.
You can find more information here
More about direct condensation in the storage tank
Data sheet Safety Heat Exchanger
Our wholesaler for standard heat exchanger
* Material not standardized in EN
Storage heating, circulation heating of domestic water, protecting solid fuel boilers from overheating, or controlling the temperature of oils and emulsions: With our WRW series of heat exchangers, you are putting your trust in highly developed, compact solutions that are ready to install.
Your advantages at a glance
- Compact design due to high thermal conductivity of copper combined with increased heat transfer area
- Proven corrosion resistance
- Retrofittable due to compact spiral design
- Standard designs from stock
You can find more information here
* Material not standardized in EN
Figure out with us the best heat exchanger design for your heat-transfer challenge
The requirements of heat exchangers are as diverse as their applications - this is why nine out of ten heat exchangers we deliver, are customized to our clients' needs. Together with you, we develop innovative heat exchanger concepts that clearly set you apart from other manufacturers in terms of efficiency, compact design and service life: from customized fittings for optimum installation through to the complete heat exchanger design in the material that best suits your application. For challenging operations like the use of natural refrigerants, e.g. in transcritical CO2 systems (R744) with high operating pressures up to 130 bar, or for applications with propane (R290), ammonia (R717) and water (R718), we serve you with our knowledge from the very beginning of your design.
Our offer
- Together we clarify your heat-transfer and design challenge,
- we design the best solution using our CAD heat-transfer and forming technology know-how,
- we create functional prototypes and
- measure their performance at our in-house thermal engineering laboratory,
- supporting you from the design of the prototype through to series production.
Your application
We are delivering customized solutions to fulfill your requirements – less refrigerant volume and material usage, a very compact design for your special construction space or higher safety aspects. With this flexibility we are well prepared for your special applications, for example the use of natural high pressure refrigerants or the advancement of an ambitious laser gas cooling.
Your benefits at a glance
- Solution for your specific heat-transfer challenge
- Compact solutions using as little material as possible
- Ready-to-install solutions for your trouble-free series production
- Optimal thermal characteristics at low pressure drops
- Engineering and manufacturing from a single source
Our materials
Depending on your requirements regarding corrosion resistance, thermal conductivity as well as mechanical and processing properties, we choose the most suitable material.
You can find more product information here
Customized Heat Exchangers
Safety heat exchanger for domestic hot water heat pump
Design your S&T heat exchangers directly online:
ThermalS
* Material not standardized in EN
Solder fitting
For connoisseurs of the plumbing and heating trade, the Conex | Bänninger >B< is a trademark that has stood for safety, quality and innovative products since 1909.
Fittings made of copper from Conex | Bänniger of the 5000 series: this material is oxygen-free and contains a copper mass fraction of at least 99.90%. It has excellent soft and hard solderability.
Gunmetal fittings from Conex | Bänniger of the 4000 and 3000 series: the gunmetal alloy of the cast fittings fully complies with the requirements of the new EN 1982 and can therefore be used for drinking water in accordance with ÖNORM
B 5014-3. The alloy offers the highest possible protection and has good soft and hard solderability.
CONEX clamping ring connectors
CONEX clamping ring connectors belong to the group of metal-sealing smooth pipe connections and consist of a fitting body, clamping ring and union nut. The tubes to be connected are pushed through the pre-assembled connection into the fitting body as far as it will go and the union nut is tightened by hand. The union nuts are tightened with commercially available tools or with the CONEX wrench. In the process, the clamping ring deforms and forms the metallic sealing connection between the tube and the fitting.
>B< Press Fitting and >B< Press Gas Fitting
With the current >B< Press connection technology made of material copper and gunmetal, we offer another highly economical installation technology. >B< Press Fittings series P4000 and P5000 have been specially developed for the field of plumbing and heating installation and can also be used for many other applications. The >B< Press Fittings range includes over 300 different items in copper and gunmetal materials. The >B< Press Gas Fittings series PG4000 and PG5000 have the quality mark certificate no. G 2.692 for gas.
>B< Oyster
The high quality transition coupling >B< Oyster made of gunmetal allows a quick, clean and economical assembly of all screwed components with internal thread. Application in the fields of drinking water, rainwater, heating, oil-free compressed air and in industry. The cold and energy-independent connection technology is particularly suitable for installation in areas at risk of fire. >B<-Oysters are detachable and reusable.
* Material not standardized in EN
* Material not standardized in EN
Materials
| Wieland | EN Designation | EN No. | ASTM UNS-No. |
|---|---|---|---|
| K18/K32 | Cu-ETP | CW004A | C11000 |
| K20/K21/K28 | Cu-DHP | CW024A | C12200 |
| K30 | Cu-OF | CW008A | C10200 |
| Wieland | EN Designation | EN No. | ASTM UNS-No. |
|---|---|---|---|
| K44 | CuNi1Pb0.6P* | - | C19140 / C19150 |
| K60 | CuCr1Zr | CW106C | C18150 |
| K96 | CuCo1Ni1Be | CW103C | - |
| KC1 | CuPb1P | CW113C | C18700 |
| Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. |
|---|---|---|---|---|
| Z11 | CuZn35Pb1 | CW600N | C34000 | |
| Z12 | CuZn35Pb2 | CW601N | C34200 / C34500 | |
| Z21 | CuZn38Pb2 | CW608N | C3713 | |
| Z23 | CuZn36Pb3 | CW603N | C36000 | |
| Z29 | CuZn39Pb2 | CW612N | C37700 | |
| Z31/Z41/Z48 | CuZn40Pb2 | CW617N | C38000 | |
| Z32/Z33 | CuZn39Pb3 | CW614N | C38500 | |
| Z43 | CuZn33Pb1AlSiAs | CW725R | - | |
| Z45/Z46 | CuZn36Pb2As | CW602N | C35330 |
| Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. |
|---|---|---|---|---|
| M37/M38 | CuZn37 | CW508L | C27200 | C2720 |
| eco M41® | CuZn38As | CW511L | C27453 | |
| eco M57® | CuZn42 | CW510L | - |
| Wieland | EN Designation | EN No. | ASTM UNS-No. |
|---|---|---|---|
| S35 | CuZn35Ni3Mn2AlPb | CW710R | - |
| S40 | CuZn37Mn3Al2PbSi | CW713R | C67420 |
| eco SW1® | CuZn21Si3P | CW724R | C69300 |
| eco SZ2® | CuZn36Si1P | CW726R | C68370 |
| eco SZ3® | CuZn40SiP | - | - |
| eco SZ4® | CuZn42 | CW510L | C28500 |
| eco SZ5® | CuZn40 | CW509L | C27450 |
| Wieland | EN Designation | EN No. | ASTM UNS-No. |
|---|---|---|---|
| B06 | CuSn6 | CW452K | C51900 |
| B06 | CuSn6 | CW452K | C51900 |
| B12/B21 | CuSn8P/CuSn8 | CW459K/CW453K | C52100 |
| Wieland | EN Designation | EN No. | ASTM UNS-No. |
|---|---|---|---|
| U33 | CuAl10Ni5Fe4 | CW307G | C63000 |
| Wieland | EN Designation | EN No. | ASTM UNS-No. |
|---|---|---|---|
| N29 | CuNi18Zn20 | CW409J | - |
| N31 | CuNi7Zn39Pb3Mn2 | CW400J | - |
| N32 | CuNi12Zn30Pb1 | CW406J | - |
| N37 | CuNi18Zn19Pb1 | CW408J | - |
| Wieland | EN Designation | EN No. | ASTM UNS-No. |
|---|---|---|---|
| A01 | AlMgSiBi | AW-6026 | - |
| A02 | AlCu6BiPb | AW-2011 | - |
| A03 | AlCu4MgSi(A) | AW-2017A | - |
| A07 | AlZn5,5MgCu | AW-7075 | - |
| A11 | AlSi1Sn1MgBi | AW-6023 | - |
| A12 | AlMgSiPb | AW-6012 | - |
| A13 | AlMg3 | AW-5754 | - |
| A14 | AlMg4,5Mn0,7 | AW-5083 | - |
| A22 | AlMgSi | AW-6060 | - |
| A32 | AlSi1MgMn | AW-6082 | - |
* Material not standardized in EN
Wieland manufactures solid and hollow copper sections in a wide range of sizes. Featuring contours close to the final geometry, these sections help you obtain your finished parts in just a few operations. Together with you, we develop complex sections of copper from the draft to the initial prototypes to series production.
* Material not standardized in EN
* Material not standardized in EN
Wieland ecoline is our answer to enable your future business: the lead-free product line fulfills your individual needs for an efficient production and future oriented product development. And is, of course, compliant with the latest requirements of legislative directives on lead-free materials.
Learn more about
Wieland ecoline
* Material not standardized in EN
Wieland hot stamping rods
Good forging results can be obtained only when all links in the process chain have been matched to each other to the optimal effect. With Wieland hot stamping rods you are offered a forging stock which comprehensively fulfils these requirements. Your benefits: uniform dark surface for reproducible processing properties, tight diameter tolerances in the drawn size range, and hence precise configuration of the slug weight.
* Material not standardized in EN
Learn more
Strips for connector
Hot dip tinned copper and copper-alloy strip
Strip for semiconductor packages
Materials
| Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. |
|---|---|---|---|---|
| K09 | Cu-OFE | CW009A | C10100 | C1011 |
| K11 | Cu-OF | CW008A | C10200 | |
| K12 | Cu-HCP | CW021A | C10300 | |
| K12 | Cu-HCP | CW021A | C10300 | |
| K14 | Cu-PHC | CW020A | C10300 | |
| K19 | Cu-DHP | CW024A | C12200 | C1220 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| K32 | Cu-ETP | CW004A | C11000 | C1100 |
| Wieland | EN Designation | EN No. | ASTM UNS-No. |
|---|---|---|---|
| K42 | CuZn0,5 | CW119C | - |
| K65 | CuFe2P | CW107C | C19400 |
| K80 | CuFe0,1P* | - | C19210 |
| K81 | CuSn0,15 | CW117C | C14415 |
| Wieland | EN Designation | EN No. | ASTM UNS-No. |
|---|---|---|---|
| K55 | CuNi3Si1Mg* | - | C70250 |
| K57 | CuNi1Co1Si* | - | C70350 |
| K58 | CuNi3Si1Mg | - | C70250 |
| K73 | CuNi1ZnSi* | - | C19005 |
| K75 | CuCrSiTi* | - | C18070 |
| K76 | CuNiSiP* | - | C19010 |
| K88 | CuCrAgFeTiSi* | - | C18080 |
| Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. |
|---|---|---|---|---|
| Z21 | CuZn38Pb2 | CW608N | C3713 | |
| Z30 | CuZn39Pb2 | CW612N | C37700 |
| Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. | Dimensions | Temper |
|---|---|---|---|---|---|---|
| M05 | CuZn5 | CW500L | C21000 | C2100 | ||
| M10 | CuZn10 | CW501L | C22000 | C2200 | ||
| M15 | CuZn15 | CW502L | C23000 | C2300 | 0.25 mm | F26 |
| M15 | CuZn15 | CW502L | C23000 | C2300 | 0.30 mm | F26 |
| M15 | CuZn15 | CW502L | C23000 | C2300 | 0.35 mm | F26 |
| M15 | CuZn15 | CW502L | C23000 | C2300 | 0.40 mm | F26 |
| M15 | CuZn15 | CW502L | C23000 | C2300 | 0.50 mm | F26 |
| M15 | CuZn15 | CW502L | C23000 | C2300 | 0.60 mm | F26 |
| M15 | CuZn15 | CW502L | C23000 | C2300 | 0.80 mm | F26 |
| M15 | CuZn15 | CW502L | C23000 | C2300 | 0.25 mm | F26 |
| M15 | CuZn15 | CW502L | C23000 | C2300 | 0.80 mm | F26 |
| M15 | CuZn15 | CW502L | C23000 | C2300 | 0.25 mm | F37 |
| M15 | CuZn15 | CW502L | C23000 | C2300 | 0.80 mm | F37 |
| M15 | CuZn15 | CW502L | C23000 | C2300 | ||
| M20 | CuZn20 | CW503L | C24000 | C2400 | ||
| M28 | CuZn28 | CW504L | C25600 | 0.60 mm | F35 | |
| M28 | CuZn28 | CW504L | C25600 | 0.80 mm | F35 | |
| M28 | CuZn28 | CW504L | C25600 | 0.80 mm | F42 | |
| M30 | CuZn30 | CW505L | C26000 | C2600 | 0.79 mm | F35 |
| M30 | CuZn30 | CW505L | C26000 | C2600 | 0.79 mm | F42 |
| M30 | CuZn30 | CW505L | C26000 | C2600 | ||
| M33 | CuZn33 | CW506L | C26800 | C2680 | ||
| M36 | CuZn36 | CW507L | C26800 / C27000 | C2700 | ||
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.80 mm | R410 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.10 mm | F44 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.15 mm | F44 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.20 mm | F44 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.30 mm | F44 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.40 mm | F44 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.50 mm | F44 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.60 mm | F44 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.70 mm | F44 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.80 mm | F44 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 1.00 mm | F44 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 1.20 mm | F44 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 1.50 mm | F44 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 2.00 mm | F44 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.15 mm | F54 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.20 mm | F54 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.25 mm | F54 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.30 mm | F54 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.35 mm | F54 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.40 mm | F54 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.50 mm | F54 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.60 mm | F54 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.70 mm | F54 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.80 mm | F54 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 1.00 mm | F54 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | ||
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.20 mm | F30 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.25 mm | F30 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.40 mm | F30 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.50 mm | F30 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.60 mm | F30 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.80 mm | F30 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 1.00 mm | F30 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 1.20 mm | F30 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 1.50 mm | F30 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 2.00 mm | F30 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.15 mm | F37 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.20 mm | F37 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.25 mm | F37 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.30 mm | F37 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.40 mm | F37 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.50 mm | F37 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.60 mm | F37 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.79 mm | F37 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 0.80 mm | F37 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 1.00 mm | F37 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 1.20 mm | F37 |
| M37 | CuZn37 | CW508L | C27200 | C2720 | 1.50 mm | F37 |
| M38 | CuZn37 | CW508L | C27200 | C2720 |
| Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. |
|---|---|---|---|---|
| S12 | CuSn3Zn9 | CW454K | C42500 | C4250 |
| S23 | CuZn23Al3Co | CW703R | C68800 |
| Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. | Dimensions | Temper |
|---|---|---|---|---|---|---|
| B14 | CuSn4 | CW450K | C51100 | R290/R390/R480/R540/R610 H070/H115/H150/H170/H190 | ||
| B14 | CuSn4 | CW450K | C51100 | |||
| B15 | CuSn5 | CW451K | C51000 | |||
| B16 | CuSn6 | CW452K | C51900 | 0.20 mm | F41 / R420 | |
| B16 | CuSn6 | CW452K | C51900 | 0.30 mm | F41 / R420 | |
| B16 | CuSn6 | CW452K | C51900 | 0.40 mm | F41 / R420 | |
| B16 | CuSn6 | CW452K | C51900 | 0.50 mm | F41 / R420 | |
| B16 | CuSn6 | CW452K | C51900 | 0.60 mm | F 41 / R 420 | |
| B16 | CuSn6 | CW452K | C51900 | 0.79 mm | F41 / R420 | |
| B16 | CuSn6 | CW452K | C51900 | 0.80 mm | F41 / R420 | |
| B16 | CuSn6 | CW452K | C51900 | 1.00 mm | F41 / R420 | |
| B16 | CuSn6 | CW452K | C51900 | 0.10 mm | HV 160-190 / H160 | |
| B16 | CuSn6 | CW452K | C51900 | 0.15 mm | HV 160-190 / H160 | |
| B16 | CuSn6 | CW452K | C51900 | 0.18 mm | HV 160-190 / H160 | |
| B16 | CuSn6 | CW452K | C51900 | 0.20 mm | HV 160-190 / H160 | |
| B16 | CuSn6 | CW452K | C51900 | 0.25 mm | HV 160-190 / H160 | |
| B16 | CuSn6 | CW452K | C51900 | 0.30 mm | HV 160-190 / H160 | |
| B16 | CuSn6 | CW452K | C51900 | 0.35 mm | HV 160-190 / H160 | |
| B16 | CuSn6 | CW452K | C51900 | 0.38 mm | HV 160-190 / H160 | |
| B16 | CuSn6 | CW452K | C51900 | 0.40 mm | HV 160-190 / H160 | |
| B16 | CuSn6 | CW452K | C51900 | 0.50 mm | HV 160-190 / H160 | |
| B16 | CuSn6 | CW452K | C51900 | 0.60 mm | HV 160-190 / H160 | |
| B16 | CuSn6 | CW452K | C51900 | 0.70 mm | HV 160-190 / H160 | |
| B16 | CuSn6 | CW452K | C51900 | 0.79 mm | HV 160-190 / H160 | |
| B16 | CuSn6 | CW452K | C51900 | 0.80 mm | HV 160-190 / H160 | |
| B16 | CuSn6 | CW452K | C51900 | 1.00 mm | HV 160-190 / H160 | |
| B16 | CuSn6 | CW452K | C51900 | 1.20 mm | HV 160-190 / H160 | |
| B16 | CuSn6 | CW452K | C51900 | 1.50 mm | HV 160-190 / H160 | |
| B16 | CuSn6 | CW452K | C51900 | R350/R420/R500/R560/R640/R720 H080/H125/H160/H180/H200/H220 | ||
| B16 | CuSn6 | CW452K | C51900 | 0.10 mm | HV 180-210 / H180 | |
| B16 | CuSn6 | CW452K | C51900 | 0.15 mm | HV 180-210 / H180 | |
| B16 | CuSn6 | CW452K | C51900 | 0.20 mm | HV 180-210 / H180 | |
| B16 | CuSn6 | CW452K | C51900 | 0.25 mm | HV 180-210 / H180 | |
| B16 | CuSn6 | CW452K | C51900 | 0.30 mm | HV 180-210 / H180 | |
| B16 | CuSn6 | CW452K | C51900 | 0.35 mm | HV 180-210 / H180 | |
| B16 | CuSn6 | CW452K | C51900 | 0.38 mm | HV 180-210 / H180 | |
| B16 | CuSn6 | CW452K | C51900 | 0.40 mm | HV 180-210 / H180 | |
| B16 | CuSn6 | CW452K | C51900 | 0.50 mm | HV 180-210 / H180 | |
| B16 | CuSn6 | CW452K | C51900 | 0.60 mm | HV 180-210 / H180 | |
| B16 | CuSn6 | CW452K | C51900 | 0.63 mm | HV 180-210 / H180 | |
| B16 | CuSn6 | CW452K | C51900 | 0.70 mm | HV 180-210 / H180 | |
| B16 | CuSn6 | CW452K | C51900 | 0.79 mm | HV 180-210 / H180 | |
| B16 | CuSn6 | CW452K | C51900 | 0.80 mm | HV 180-210 / H180 | |
| B16 | CuSn6 | CW452K | C51900 | 1.00 mm | HV 180-210 / H180 | |
| B16 | CuSn6 | CW452K | C51900 | 0.20 mm | HV 200-230 / H200 | |
| B16 | CuSn6 | CW452K | C51900 | 0.25 mm | HV 200-230 / H200 | |
| B16 | CuSn6 | CW452K | C51900 | 0.30 mm | HV 200-230 / H200 | |
| B16 | CuSn6 | CW452K | C51900 | 0.35 mm | HV 200-230 / H200 | |
| B16 | CuSn6 | CW452K | C51900 | 0.40 mm | HV 200-230 / H200 | |
| B16 | CuSn6 | CW452K | C51900 | 0.50 mm | HV 200-230 / H200 | |
| B16 | CuSn6 | CW452K | C51900 | 0.60 mm | HV 200-230 / H200 | |
| B16 | CuSn6 | CW452K | C51900 | 0.20 mm | FB370 / B370 | |
| B16 | CuSn6 | CW452K | C51900 | 0.30 mm | FB370 / B370 | |
| B16 | CuSn6 | CW452K | C51900 | 0.40 mm | FB370 / B370 | |
| B16 | CuSn6 | CW452K | C51900 | 0.50 mm | FB370 / B370 | |
| B16 | CuSn6 | CW452K | C51900 | 0.30 mm | HV 200-220 / H190 | |
| B16 | CuSn6 | CW452K | C51900 | 0.50 mm | HV 190-210 / H190 | |
| B16 | CuSn6 | CW452K | C51900 | |||
| B18 | CuSn8 | CW453K | C52100 | C5212 | R370/R450/R540/R600/R660/R740 H090/H135/H170/H190/H210/H230 | |
| B18 | CuSn8 | CW453K | C52100 | C5212 | ||
| B31 | CuSn2Fe0,1P* | - | C50715 |
| Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. | Dimensions | Temper |
|---|---|---|---|---|---|---|
| N12 | CUNi12Zn24 | CW403J | C75700 | |||
| N17 | CuNi18Zn27 | CW410J | C77000 | C7701 | ||
| N18 | CuNi18Zn20 | CW409J | C76400 | C7521 | 0.30 mm | F38 / R380 |
| N18 | CuNi18Zn20 | CW409J | C76400 | C7521 | 0.20 mm | F45 / R450 |
| N18 | CuNi18Zn20 | CW409J | C76400 | C7521 | 0.25 mm | F45 / R450 |
| N18 | CuNi18Zn20 | CW409J | C76400 | C7521 | 0.50 mm | F45 / R450 |
| N18 | CuNi18Zn20 | CW409J | C76400 | C7521 | 0.15 mm | HV 160-190 / H160 |
| N18 | CuNi18Zn20 | CW409J | C76400 | C7521 | 0.20 mm | HV 160-190 / H160 |
| N18 | CuNi18Zn20 | CW409J | C76400 | C7521 | 0.25 mm | HV 160-190 / H160 |
| N18 | CuNi18Zn20 | CW409J | C76400 | C7521 | 0.30 mm | HV 160-190 / H160 |
| N18 | CuNi18Zn20 | CW409J | C76400 | C7521 | 0.40 mm | HV 160-190 / H160 |
| N18 | CuNi18Zn20 | CW409J | C76400 | C7521 | 0.50 mm | HV 160-190 / H160 |
| N18 | CuNi18Zn20 | CW409J | C76400 | C7521 | 0.60 mm | HV 160-190 / H160 |
| N18 | CuNi18Zn20 | CW409J | C76400 | C7521 | 0.80 mm | HV 160-190 / H160 |
| N18 | CuNi18Zn20 | CW409J | C76400 | C7521 | ||
| N39 | CuNi12Zn25Pb1 | CW404J | C79200 | |||
| N41 | CuNi7Zn37Pb1 | - | - |
* Material not standardized in EN
For decades, tin coatings produced by the process known as "hot-dip tinning" have ensured the reliable performance of billions and billions of connectors in industrial, automotive and communication electronics.
* Material not standardized in EN
Special products for the manufacture of power transistors and complex plug connectors. Components no longer need to be assembled from two or more punched parts, but can consist of the one part punched from the multi-gauge strip – efficient and of homogeneous quality!
Learn more
Multi-gauge strip
* Material not standardized in EN
We can offer you a wide range of materials, geometries, and surface qualities to choose from. Many geometries are available from our sheets stores.
| Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. | Dimensions |
|---|---|---|---|---|---|
| K19 | Cu-DHP | CW024A | C12200 | C1220 | on request |
| K32 | Cu-ETP | CW004A | C11000 | C1100 | on request |
| Wieland | EN Designation | EN No. | ASTM UNS-No. | Dimensions | Temper |
|---|---|---|---|---|---|
| Z30 | CuZn39Pb2 | CW612N | C37700 | 670 × 1340 and 600 × 2000 format; thicknesses from 0.8 to 30 mm | hardened |
| Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. | Dimensions | Temper |
|---|---|---|---|---|---|---|
| M37 | CuZn37 | CW508L | C27200 | C2720 | 670 × 1340, 800 × 2000, 600 × 2000 format; thicknesses from 0.3 to 16 mm | annealed, semihardened and hardened |
| Wieland | EN Designation | EN No. | ASTM UNS-No. | Dimensions | Temper |
|---|---|---|---|---|---|
| B16 | CuSn6 | CW452K | C51900 | 0.10 – 3.0 mm | R350/R420/R500/R560/R640/R720 H080/H125/H160/H180/H200/H220 |
* Material not standardized in EN
Available materials
| Wieland | EN | EN-Nr. | UNS |
| K08 | Cu-OFE | CW009A | C10100 |
| K12 | Cu-HCP | CW021A | C10300 |
| K20 / K21 / K28 | Cu-DHP | CW024A | C12200 |
| K30 | Cu-OF | CW008A | C10200 |
| K65 | CuFe2P | CW107C | C19400 |
| L10 | CuNi10Fe1Mn | CW352H | C70600 |
| L30 | CuNi30Mn1Fe | CW354H | C71500 |
Delivery forms
- Level wound coils: 100 kg, 150 kg, 300 kg, 530 kg
- Straight lengths
- Rings
Materials
K65 - Sustainable and efficient
Sustainable and efficient – two keywords that have had a decisive impact on our time and have gained in relevance in recent years, especially in refrigeration. Increased environmental awareness in society and industry has therefore led to a kind of renaissance of natural refrigerants, especially CO2. Wieland supports this turnaround with a tube system that meets the high requirements of CO2 as a refrigerant.
Wieland K65 tubes have been designed for CO2 applications in the commercial field, especially that of supermarket refrigeration systems. Wieland K65 alloy provides the mechanical strength high enough to withstand the high operating pressures of CO2. At the same time, K65 tubes have outstanding processing properties, similar to those of standard copper (Cu-DHP/C12200).
All Wieland K65 tubes are available in the soft condition (R300/O61) to ensure excellent bending / flaring and collaring properties.
Wieland K65 tubes are offered from stock in two pressure ranges, 80 bar and 120 bar, and in dimensions ranging from 3/8” up to 2-1/8”.
Moreover, K65 tubes are also available in individual dimensions and different delivery forms.
For industrial processing, in particular CO2 heat exchanger (evaporator / gas cooler) manufacturing, level wound coils (LWC) are offered.
More K65 products in other categories
Your benefits
- Pressure resistance tailormade to your needs
- Cost reduction through weight reduction
- Proven processing technology: brazing instead of welding!
- Excellent heat transfer
- Design according to EN 14276 - TUEV or UL certification on demand
Typical applications
- Components of R744 refrigeration systems
- Fin coil heat exchangers for higher operation pressures (e.g. R744 evaporators or gas coolers )
- Shell and tube heat exchangers for higher operation pressures (e.g. R744 evaporators or gas coolers)
Technical properties
- Material: K65
- Conditions: soft R300/O61 and hard R420/H80
- Delivery form: Level wound coils or straight lengths
- Coil weights: 100 kg, 150 kg, 300 kg
- Available dimensions: 5 - 28 mm for LWC; 5 - 110 mm for straight lengths
- Usual standards: EN 12735-1 / EN 14276 / ASTM B 1017
Further information
cuproclima
For high-quality seamless inside smooth or innergrooved copper tubes in level-wound coils for the refrigeration and air-conditioning industries. The specified quality and inspection criteria exceed the existing requirements of standards (e. g. EN 12735-2, ASTM).
Your benefits
- longer run time for machines when uncoiling tubes
- reduced scrap for finished products
- reduced set-up time
- detection of even smaller surface defects on the tubes
- possible malfunctions of finished equipment during pressure testing are reduced
- fewer impurities in the refrigerant circuit.
Fields of application
- air-cooled heat exchangers for the air-conditioning and refrigeration industry
- evaporators
- condensers
- heat exchangers
- air coolers
Technical Properties
- Materials Cu-DHP
- Conditions soft and extra soft
- Delivery form level wound coils only
- Coil weights 100 kg, 150 kg, 300 kg
- Available dimensions 4 - 28 mm, wall thicknesses on request
Copper tubes with ultra clean inner surface for industrial applications
Our innovative production process for cuproclean tubes removes carbon film. This results in higher reliability, longer life and reduced maintenance costs.It is suitable for all fresh water applications. Copper offers outstanding versatility and is characterized by excellent formability as well as good processing properties. cuproclean copper tubes are also available in combination with other qualities such as cuproform.
Your benefits
- ultra-clean tube surface free from carbon film
- highest reliability and longer life also in fresh water applications
- best corrosion resistance
- carbon film test according to EN 1057 and confirmation in the certificate
Fields of application
- cooling ceilings
- solar water heating systems
- heat generators
Technical properties
- Materials Cu-DHP
- Conditions Soft
- Delivery form Level wound coils
- Coil weights 100 kg, 150 kg, 300 kg
- Available dimensions 6 - 28 mm, wall thicknesses on request
High formable copper tubes
In boiler manufacture, for example the tubes may be formed by: expanding, bending, upsetting and beading. Industrial copper tubes from conventional production do not always meet these high demands. Therefore, it is often necessary to use additional fittings made from other materials. This results in further production steps and consequently higher production costs.
Your benefits
- no special fittings necessary; this results in lower costs of production
- higher added value in your production
- exceptional forming properties – 80% expansion of the tube end tested and certified on the inspection certificate
- less scrap with very high deformation
Fields of application
- Connecting pieces, e.g. especially for boilers
Technical properties
- Materials Cu-DHP
- Conditions soft and extra soft
- Delivery form Layer-wound coils and straight lengths
- Coil weights 100 kg, 150 kg, 300 kg, 530 kg
- Available dimensions 6 - 28 mm for LWC; 6 - 64 mm for straight lengths
Copper tubes with high-purity outer surface for solar thermal applications
In the process of manufacturing solar heat absorbers requirements vary depending on the application. In the solarclean family you will find the most suitable copper tube quality for your optimized fabrication.
solarclean classic
The particularly clean tube surface ensures a high quality weld. You can therefore save at least one cleaning operation or an extensive pre-treatment of the components to be welded.
solarclean HP
For heat pipes in vacuum tube collectors - highest surface cleanliness on tube outside and inside prevents contamination of the heat transfer medium in the heat pipe and yet ensures the efficiency of the system.
solarclean plus
Improved forming properties for the fabrication of meander-shaped absorber tubes facilitate the setting of the bending machines and increase process reliability. solarclean_plus ensures super clean tube surfaces substantially improving the ultrasonic welding process.
solarclean eco
The cost-effective alternative for laser welding of absorber plate and tubing with sufficient cleanliness.
solarclean SL
Like solarclean classic, solarclean SL ensures superclean tube surfaces. Depending on your fabrication needs, you can also order solarclean in straight lengths.
Technical properties
- Materials Cu-DHP
- Conditions hard, hard relaxed, half-hard
- Delivery form Layer-wound coils and straight lengths
- Coil weights 100 kg, 150 kg, 300 kg, 530 kg
- Available dimensions 6 - 15 mm; wall thicknesses 0.3-1.2 mm
* Material not standardized in EN
Available materials
| Wieland | EN | EN-Nr. | UNS |
| K20 / K21 / K28 | Cu-DHP | CW024A | C12200 |
| L10 | CuNi10Fe1Mn | CW352H | C70600 |
| K65 | CuFe2P | CW107C | C19400 |
Materials
K65 - Sustainable and efficient
two keywords that have had a decisive impact on our time and have gained in relevance in recent years, especially in refrigeration. Increased environmental awareness in society and industry has therefore led to a kind of renaissance of natural refrigerants, especially CO2. Wieland supports this turnaround with a tube system that meets the high requirements of CO2 as a refrigerant.
Wieland K65 tubes have been designed for CO2 applications in the commercial field, especially that of supermarket refrigeration systems. Wieland K65 alloy provides the mechanical strength high enough to withstand the high operating pressures of CO2. At the same time, K65 tubes have outstanding processing properties, similar to those of standard copper (Cu-DHP/C12200).
Innergrooved K65 tubes for manufacturing of CO2 heat exchangers (evaporator / gas cooler) are available in individual dimensions. These are delivered in level wound coils (LWC) or straight lengths alternatively.
Wieland K65 tubes are also available from stock in standard dimensions.
More K65 products in other categories
Your benefits
- Pressure resistance tailormade to your needs
- Cost reduction through weight reduction
- Proven processing technology: brazing instead of welding!
- Excellent heat transfer
- Design according to EN 14276 - TUEV certification on demand
Typical applications
- Fin coil heat exchangers for higher operation pressures (e.g. R744 evaporators or gas coolers)
- Shell and tube heat exchangers for higher operation pressures (e.g. R744 evaporators or gas coolers)
Technical properties
- Materials: K65
- Conditions: soft R300/O61 and hard R420/H80
- Delivery form: Level wound coils or straight lengths
- Coil weights: 100 kg, 150 kg, 300 kg
- Available dimensions: 5 - 16 mm
- Usual standards: EN 12735-1 / EN 14276 / ASTM B 1017
Further information
cuprofin-Standard
Wieland cuprofin-Standard tubes are effiecient heat exchanger tube that are suitable for one and two-phased flow as well as for evaporation and condensation. This enables the flexible production of efficient and compact heat exchangers. There is no need to keep a stock of different specialized tube types.
Your benefits
- improved heat transfer due to fin structure on the inside of the tube
- compact heat exchanger construction
- reduced material input
- Internal structure suitable for evaporation, condensation and single-phase heat transfer
cuprofin-standard is also available in superclean quality and as a microgroove tube.
Fields of application
- Finned heat exchangers for the refrigeration/air conditioning industry
- Evaporator
- Condensers
- Recooler
- Air Cooler
- Tube bundle injection evaporator
- Heat exchangers in the form of coiled elements (e.g. container heating and cooling)
Technical properties
- Delivery form Layer-wound coils and straight lengths up to 7,9m
- Coil weights 100 kg, 150 kg, 300 kg
- Usual standards
- EN 12735-2
- ASTM B359
- VdTÜV 420/6, 420/7
Further Information
cuprofin-C tubes for condensors
Wieland cuprofin-C Tubes are highly efficient heat transfer tubes for the tube-side condensation of refrigerants. Depending on the fluid used, the fins on the inside of the tube are optimized for high performance with low material usage. They enable the design of highly efficient and compact heat exchangers.
Your benefits
- optimized heat transfer due to adapted fin structure on the inside of the tube
- compact heat exchanger construction
- reduced refrigerant charge
- reduced material input
cuprofin-C is also available in superclean quality and as microgroove tube.
Fields of application
- Finned heat exchangers, especially condensers
- Heat exchangers in the form of coiled elements (e.g. container heating)
Technical properties
- Delivery form Layer-wound coils and straight lengths up to 7,9m
- Coil weights 100 kg, 150 kg, 300 kg
- Usual standards
- EN 12735-2
- ASTM B359
- VdTÜV 420/6, 420/7
Further Information
cuprofin-E tubes for evaporators
Wieland cuprofin-E tubes are highly efficient heat transfer tubes for the tube-side evaporation of refrigerants in finned heat exchangers. The fins on the inside of the tubes are designed for optimum performance during flow boiling and the lowest possible pressure drop for a wide range of refrigerants.
Your benefits
- optimized heat transfer due to adapted fin structure on the inside of the tube
- compact heat exchanger construction
- extremely low pressure drop
- reduced material input
cuprofin-E is also available in superclean quality and on requiry as a microgrooved tube.
Fields of application
- Finned heat exchangers, especially evaporators
Technical properties
- Delivery form Layer-wound coils and straight lengths up to 7,9m
- Coil weights 100 kg, 150 kg, 300 kg
- Usual standards
- EN 12735-2
- ASTM B359
- VdTÜV 420/6, 420/7
Further Information
cuprofin-EDX tubes for injection
cuprofin-EDX are highly efficient and stable heat exchanger rubes for Injection evaporator in tube bundle design.
Your benefits
- optimized heat transfer and very low pressure drop
- compact heat exchanger construction
- reduced material input
cuprofin-EDX is also available in superclean quality and on request as a microgroove tube.
Fields of applications
- Tube bundle injection evaporator
Technical properties
- Delivery form Layer-wound coils and straight lengths up to 7,9m
- Coil weights 100 kg, 150 kg, 300 kg, 530 kg
- Usual standards
- EN 12735-2
- ASTM B359
- VdTÜV 420/6, 420/7
Further Information
cuprofin-G tubes for single-phase heat transfer
Wieland cuprofin-G Tubes are highly efficient heat transfer tubes, especially designed for recooling systems and air coolers. The fins on the inside of the tubes are optimized for single-phase heat transfer of aqueous media such as water-glycol mixtures. This enables the production of efficient and compact heat exchangers.
Your benefits
- optimized heat transfer through adapted fin structure on the inside of the tube
- compact heat exchanger construction
- low pressure drop
- reduced material input
cuprofin-G is also available in superclean quality.
Fields of application
- Finned heat exchanger with single-phase heat transfer
- Recooler
- Air cooler
Technical properties
- Delivery form Layer-wound coils and straight lengths up to 7,9m
- Coil weights 100 kg, 150 kg, 300 kg
- Usual standards
- EN 12735-2
- ASTM B359
- VdTÜV 420/6, 420/7
Further Information
* Material not standardized in EN
Materials
For a more sustainable future in construction.
With its 100 % share of recycled material, the cuprolife copper tube makes a sustainable difference, and thus makes a significant contribution to the advancement of building and construction as well as building services.
Every cuprolife tube from Wieland is manufactured in keeping with the mass balance approach – using a process with 100 % recycled copper. As the starting point when verifying cuprolife, TÜV SÜD tested the procedure for calculating the 100 % recycled content*.
The new standard in copper tubes: cuprolife®.
Thanks to cutting-edge manufacturing techniques, cuprolife tubes exceed even the highest requirements. Optimal efficiency and reliability are guaranteed along with an exceptional service life. cuprolife tubes are universally usable. cuprolife is permanently in stock and can be supplied in any size from 6 x 1 mm to 159 x 3 mm.
Fields of application
- Domestic hot and cold water supply
- Heating
- Gas
- Liquid gas
- Heating oil / biofuel oil B10
- Solar systems
- Rainwater
- Industrial compressed air
- Sprinkler systems
- Firefighting systems
Technical features
- 100 % recycled copper*
- Design according to EN 1057, quality assured
- Made of pure copper Cu-DHP
- With quality mark and DVGW certification: DV-7204AU2106 (6 to 159 mm outside diameter)
- Universal use in a range of finely differentiated dimensions
- Optimum availability and compatibility with a wide range of fittings
- Maximum operating temperature at 10 bar operating pressure: 250 °C (applies to dimensions up to DN 150)
- Fire resistance: EN 13501-1 – A1 (nonflammable)
- Dimensions according to DVGW GW 392 (6 to 159 mm) with closed tube ends
- For optimal drinking water hygiene
*Mass balance approach, based on ISO 14021, verified by TÜV SÜD.
Reliable for all areas of home installation
For many years, installers have been relying on SANCO branded copper tubes. The tubes are very reliable, suitable for all areas of domestic installation and have more than proven their worth in practice. Whether drinking water supply (hot and cold), heating systems, oil, gas and liquid gas supplies as well as thermal solar systems: Wieland SANCO tubes are always the right choice and, of course, covered by the relevant regulations.
Technical features
- Patented manufacturing process: SANCO tubes are significantly better than required by standards and regulations.
- Design according to EN 1057, quality assured
- Made of pure copper Cu-DHP
- With quality mark and DVGW certification:
DV-7204AU2106 (12 to 159 mm outside diameter). - Universal use in a range of finely differentiated dimensions
- Optimum availability and compatibility with a wide range of fittings
- Maximum operating temperature: 250 °C
- Fire resistance: EN 13501-1-A1 (non-flammable)
- Dimensions according to DVGW GW 392 (12 to 159 mm) with closed tube ends
- For optimal drinking water hygiene
- Wide range of certifications available, such as Kitemark, Afnor, KIWA, DVGW and many others
Fields of application
- Domestic hot and cold water supply
- Heating systems
- Gas and oil services for heating and cooking
- Solar systems
- Rainwater
- Industrial compressed air
- Sprinkler and Fire-fighting-systems
- Further applications in consultation with our technical advisory service
WICU
WICU tubes a have a mill-applied protective coating. They are therefore suitable for concealed installation under plaster or in environments with an aggressive atmosphere, and for installation outdoors, either above or below ground.
Technical features
- Design according to EN 1057, quality assured
- Made of pure copper Cu-DHP
- With quality mark and DVGW certification:
- DV-7204AU2106 (12 to 42 mm outside diameter).
- Protective coating conforms to EN 13349 and DIN 30672-1 class B
- Reduction of condensation
- Fire resistance: EN 13501-1-E
- Color of coating: light gray
- Temperature range up to 100 °C
Fields of application
- Domestic hot and cold water supply
- Heating systems
- Gas and oil services for heating and cooking
- Rainwater
- Industrial compressed air
- Further applications in consultation with our technical advisory service
WICU Flex
WICU Flex is a plumbing tube with a flexible coating for rapid installation. The coating consists of closed-cell PE foam covered by a structured protective film. WICU Flex is supplied in coils for rapid connection to manifolds etc. and for underfloor installations.
Technical properties
- Design according to EN 1057, quality assured
- Made of pure copper Cu-DHP
- With quality mark and DVGW certification:
DV-7204AU2106 (12 to 22 mm outside diameter) - CFC/FKW-free polyethylene foam (PE) with a
- PE structural foil
- Sound insulation: DIN 4109 - A1
- Thermal conductivity of the insulation layer according to DIN 52613:
= 0.040 W/mK at 40 °C - Fire resistance: N 13401-1-E
- Color of coating: white
- Temperature application range: up to 100 °C
Fields of application
- Connecting tubes
- Domestic hot and cold water supply
- Central heating systems
cuprotherm CTX
cuprotherm CTX tubes are copper tubes with a firmly adhering coating. Due to their structure, they are very easy to process and are characterized by a flexibility so far unknown for metal tubes. CTX tubes are a technically high-quality and at the same time economically interesing solution: They offer an attractive price per meter for copper tubes at stable conditions, and are therefore also convincing in terms of reliability in planning.
Technical features
- Flexible copper tube made of pure copper Cu-DHP
- Temper: soft R220 according to EN 1057 with firmly adhering coating made of PE-RT
- Fire behavior EN 13501-1, class E
- Color of the coating: white, similar to RAL 9010 (pure white)
- Temperature application range: up to 100 °C
Fields of application
- Heating
- Cooling
- Radiator connection
- Rainwater harvesting systems
- Ground collectors (water/glycol)
- Concrete core activation
cuprotherm.plus
cuprotherm is Europe's most frequently installed copper underfloor heating system, and for good reason. The outstandingly long service life of cuprotherm copper tubes will make you forget about surface heating for decades after it has been installed. Due to the highest thermal donductivity in technical materials, efficient use for this application is also good for the wallet in the long run.
The orange coating provides mechanical and chemical protection from the outside and allows the cuprotherm tube to expand unhindered in length when the temperature changes.
Technical properties
- Design according to EN 1057
- Fire resistance: EN 13501-1-E
- Building material class: DIN 4102 - A1
- With quality mark
- Diffusion rate: 0.00 mg/m²*d after 50 years
Fields of application
- Surface heating and cooling
- Wall heating
- Industrial surfaceheating
- Sports floor heating
cuprotherm.blank
cuprotherm is Europe's most frequently installed copper underfloor heating system, and that for good reasons. The oustandingly long service life of cuprotherm copper tubes will make you forget about surface heating for decades after it has been installed. Due to the highest thermal conductivity in technical materials, efficient use for this application is also good for the wallet in the long run.
The bare copper tube also withstands high temperatures and is therefore the first choice in applications with mastic asphalt.
Technical properties
- Design according to EN 1057
- Fire resistance: EN 13501-1-A1 (non-flammable)
- With quality mark
- Diffusion rate: 0.00 mg/m²*d after 50 years
Fields of application
- Underfloor heating with mastic asphalt screed
- Wall heating with clay plaster
* Material not standardized in EN
Materials
cuprofrio – refrigeration
Wieland branded copper tubes cuprofrio and cuprofrio.plus have a high level of internal cleanliness due to the individually closed tube ends and are suitable for refrigerants according to EN 12735-1.
cuprofrio tubes can be easily processed on site and conform to high quality standards with their extremely clean and dry inner surface. Close tube ends ensure the required quality even during storage and transportation.
learn more
Your benefits
- clean and dry inside surface
- closed tube ends in order to maintain cleanliness
- supplier traceability through signature
- standard dimensions available from stock
- good processing, easy joining, very easy to unwind and bend
- tube quality according to EN 12735-1
- compliance with Pressure Equipment Directive 2014/68/EU
Fields of application
cuprofrio is suitable for technical gases and liquids, for example in
- chillers
- air-conditioning and refrigeration units
- heat exchangers
Forms of delivery
- Coils (pancakes)
- Straight lengths of 5 m
cuprofrio.plus
Wieland branded copper tubes cuprofrio and cuprofrio.plus have a high level of internal cleanliness due to the individually closed tube ends and are suitable for refrigerants according to EN 12735-1.
cuprofrio tubes can be easily processed on site and conform to high quality standards with their extremely clean and dry inner surface. Close tube ends ensure the required quality even during storage and transportation.
learn more
cuprofrio.plus
cuprofrio.plus-tubes are insulated on the outside, which prevents nearly all water condensation on the outer surface of the tube.
Your benefits
- clean and dry inside surface
- standard dimensions available from stock
- good processing, easy joining, very easy to unwind and bend
- resistant, colour-fast insulation ensures consistent material properties in all weather conditions
- prevention of condensation water through insulating layer
- supplier traceability through signature
- compliance with Pressure Equipment Directive 97/23/EC
Fields of application
cuprofrio is suitable for technical gases and liquids, for example in
- chillers
- air-conditioning and refrigeration units
- heat exchangers
cupromed – medical gas supply
The seamless drawn cupromed copper tube is used for refrigeration/air conditioning as well as for medical gas supply units according to EN ISO 7396-1. cupromed tubes in straight lengths meet the requirements according to EN 13348 and those according to EN 12735-1.
Your benefits
- clean and dry inside surface
- closed tubes ends keep the surface clean
- supplier traceability through signature
- standard dimensions available from stock
- good processing, easy joining, very easy to unwind and bend
- standard tube quality according to EN 12735-1
- compliance with Pressure Equipment Directive 2014/68/EU
- Requirements according to the PED/Pressure Equipment Directive 2014/68/EU
Fields of applications
cupromed is suitable for the transportation of technical gases and liquids as well as medical gas and vacuum in
- medical gas supply units
- refrigeration and air conditioning units
cuprogeo – geothermal energy
The seamless drawn cuprogeo tube is used for geothermal energy production. cuprogeo is designed for the use of refrigerants and gases for direct evaporation in heat pumps. The advantage of this application is that high performance can be achieved with suitable heat pumps.
Your benefits
- clean and dry inner surface
- supplier traceability through signature
- tube protected by an outside surface coating
- standard tube quality according to EN 12735-1
- requirements comply with the Pressure Equipment Directive 2014/68/EU
Fields of application
- geothermal energy
- refrigeration equipment and heat exchangers
- geothermal heat pumps with direct evaporation
K65 - Sustainable and efficient
two keywords that have had a decisive impact on our time and have gained in relevance in recent years, especially in refrigeration. Increased environmental awareness in society and industry has therefore led to a kind of renaissance of natural refrigerants, especially CO2. Wieland supports this turnaround with a tube system that meets the high requirements of CO2 as a refrigerant.
Wieland K65 tubes have been designed for CO2 applications in the commercial field, especially that of supermarket refrigeration systems. Wieland K65 alloy provides the mechanical strength high enough to withstand the high operating pressures of CO2. At the same time, K65 tubes have outstanding processing properties, similar to those of standard copper (Cu-DHP/C12200).
Wieland K65 tubes are offered from stock in two pressure ranges, 80 bar and 120 bar, and in dimensions ranging from 3/8” up to 2-1/8”.
All Wieland K65 tubes are available in the soft condition (R300/O61) to ensure excellent bending / flaring and collaring properties.
Other dimensions and delivery forms such as level wound coils are offered for industrial processing, in particular manufacturing of CO2 heat exchangers (evaporator/gas cooler).
More K65 products in other categories
Your benefits
- Cost reduction through weight reduction
- Proven processing technology: brazing instead of welding!
- Economical and safe installation of regrigeration systems with up to 120 bar operation pressure
- Excellent heat transfer
- Design according to EN 14276
Typical applications
- Pipelines for refrigeration systems, in particular for CO2 refrigerant, with an operation pressure of up to 120 bar
Technical properties
- Material: K65
- Operation pressure: 80 bar and 120 bar
- Condition: soft R300/O61
- Delivery form: straight lengths of 5 m
- Available dimensions: 9,52 - 53,97 mm (3/8" - 2-1/8")
- Tube ends: closed
- Usual standards: EN 14276 / EN 12735-1
Further information
* Material not standardized in EN
Wieland can offer you wire and sectional made of a wide range of materials: wrought copper alloys and alloys extending from brass, both with and without lead, to bronze, to German silver. And in combination with material properties, sizes, and geometries, our delivery portfolio can meet virtually every requirement. Simply contact us!
| Wieland | EN Designation | EN No. | ASTM UNS-No. | Dimensions | Temper |
|---|---|---|---|---|---|
| K18/K32 | Cu-ETP | CW004A | C11000 | 0.3 – 4.5 mm | extruded |
| Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. | Dimensions | RoHS compliant | REACH | Temper |
|---|---|---|---|---|---|---|---|---|
| Z12 | CuZn35Pb2 | CW601N | C34200 / C34500 | on request | yes | Pb > 0.1 | extruded | |
| Z21 | CuZn38Pb2 | CW608N | C3713 | on request | yes | Pb > 0.1 | extruded | |
| Z21 | CuZn38Pb2 | CW608N | C3713 | 3.0 – 6.5 mm | yes | Pb > 0.1 | extruded | |
| Z32/Z33 | CuZn39Pb3 | CW614N | C38500 | on request | yes | Pb > 0.1 | extruded | |
| Z32/Z33 | CuZn39Pb3 | CW614N | C38500 | 1.5 – 8.0 mm | yes | Pb > 0.1 | extruded |
| Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. | Dimensions | RoHS compliant | REACH | Temper |
|---|---|---|---|---|---|---|---|---|
| M37/M38 | CuZn37 | CW508L | C27200 | C2720 | on request | yes | Pb < 0.1 | extruded |
| eco M41® | CuZn38As | CW511L | C27453 | on request | yes | Pb < 0.2 | extruded | |
| eco M57® | CuZn42 | CW510L | - | on request | yes | Pb < 0.2 | extruded |
| Wieland | EN Designation | EN No. | ASTM UNS-No. | Dimensions | RoHS compliant | REACH | Temper |
|---|---|---|---|---|---|---|---|
| eco SW1® | CuZn21Si3P | CW724R | C69300 | on request | yes | Pb > 0.1 | extruded |
* Material not standardized in EN
Resources
Information material and important documents for download
15
result/s
Brochures
K65_POL.pdf
1.73 MiB
Brochures
Rury-miedziane-–-budownictwo-klimatyzacja-chłodnictwo.pdf
2.7 MiB
Certificates
ISO-9001-263981-2018-AQ-POL-RvA-2-en-US.pdf
1.86 MiB
Certificates
ISO-9001-263981-2018-AQ-POL-RvA-2-pl-PL.pdf
1.86 MiB
Quality
Klauzula-Informacyjna-Rodo.pdf
186.22 KiB
Quality
RoHS.pdf
271.35 KiB
Quality
Klauzula-Informacyjna.pdf
349.39 KiB
Quality
Polityka-Jakosci.pdf
279.91 KiB
Quality
REACH.pdf
270.92 KiB
Quality
Numery-SCIP.pdf
166.09 KiB
Terms and conditions
Allgemeine-Einkaufsbedingungen.pdf
421.47 KiB
Terms and conditions
General-Terms-and-Conditions-of-Purchase.pdf
48.67 KiB
Terms and conditions
Ogólne-Warunki-Dostawy.pdf
73.01 KiB
Terms and conditions
General-Terms-and-Conditions-of-Delivery.pdf
62.1 KiB
Terms and conditions
Wieland-Slaskie-Metale-strategia-podatkowa.pdf
3.06 MiB
Contact person
Get in touch - Your contact person at Wieland Śląskie Metale Sp. z o.o.
Rafal Skrzypczak
Managing Director
Wieland Slaskie
+48 33 3339081
Send email
Patryk Szczyrek
Sales Director
Wieland Slaskie
+48 333 339 082
Send email
Jarosław Jaworski
Sales Executive
Wieland Slaskie
+48 660 685 889
Send email
Katarzyna Duda
Product Manager
Wieland Slaskie
+48 333 339 083
Send email
Wiesław Krużel
Product Manager
Wieland Slaskie
+48 604 237 858
Send email
Katarzyna Marcińska
Product Manager
Wieland Slaskie
+48 333 339 084
Send email
Tomasz Surówka
Product Manager
Wieland Slaskie
+48 570 328 114
Send email
Beata Bober
Customer Service
Wieland Slaskie
+48 660 685 890
Send email
Anna Sikora
Customer Service
Wieland Slaskie
+48 333 339 085
Send email
Wieland Śląskie Metale Sp. z o.o.
ul. Wypoczynkowa 34
43-382 Bielsko-Biała
+48 33 333 9080
slaskie@wieland.com
Managing Director:
Rafał Skrzypczak
Commercial Register:
0000048333
VAT Identification Number:
PL1130407516
Regon:
011984640
Share capital:
183 000,00 PLN
Career
Start your career at Wieland Śląskie Metale Sp. z o.o.
Unleash potential.
Welcome to Wieland. I am your virtual assistant.
Do you need help finding information?
Already know your search term? Then go ahead and use our full text search. You will get a list of all relevant results.