Wieland Metal Services Germany GmbH | Trossingen
- Wide range of products
- Value-added processing/cutting to length
- Small and big containers for material waste (Recycling)
- Surface plating
- State-of-the-art storage technology
- Just-in-time-delivery
Organization
78647 Trossingen
Germany (UTC+1)
8:00 am - 12:15 pm
01:00 pm - 05:00 pm
Friday
8:00 am - 12:00 pm
01:00 pm - 03:30 pm
08:00 am - 11:45 am
01:00 pm - 04:30 pm
Friday
by arrangement
Facts
founded
m2 storage technology
employees
Metal Information
Current metal prices
Products
Our products at a glance
Product categories
Headline
Back to product overviewIngots
Rods
Sectional rod
ecoline®: Lead-free solutions
Precision continuous casting
Forging Stock
Strip
Sheets and Plates
Tubes
Wire
Ecocast Properties
Wieland | EN Designation | EN-No. | ASTM-UNS-No. |
---|---|---|---|
CuZn21Si3P-C | CC768S | C87850 | |
| CuZn21Si3P-B | CB768S |
|
High mechanical strength
Its grain refiner ensures an extremely fine grain size, facilitating even distribution of force throughout the entire structure. The result: strength and hardness otherwise only known in steel, even with thin, weight-reducing wall thicknesses.
Improved casting
Thanks to its fine-grained structure, Ecocast is ideal for filigree components.
Reduced waste
In every situation where you were previously dependent on red brass for filigree shapes, the high amount of waste of this conventional material is eliminated with Ecocast.
Excellent machinability
Ecocast and its special chemical composition also makes reworking cast parts through machining, grinding, polishing, or coating safe, precise, and cost-effective.
Top-rate corrosion resistance
The fine-grained structure through and through also means minimal dezincification on the surface due to touching, oxidation, or cleaning.
The future is lead-free
Secure your market lead: with Ecocast you can design and equip your products for the future, too. After all, many countries and various customers are already implementing strict regulations concerning the use of lead-free materials.
Universal
Ecocast can be cast both in ingot molds and in sand. The material is standardized under CC768S in EN 1982.
Ecocast: The New Material for Sanitary Installations
Ecocast is the perfect material for sanitary installations, not just for meeting drinking water regulations in the future, but also mainly for meeting current cost-efficiency requirements. Thanks to its high mechanical strength, Ecocast achieves wall thicknesses that help significantly reduce weight and save on materials and costs without compromising on stability. Moreover, Ecocast can handle forces (or moments) that until now have only been reserved for steel. The fine-grained structure and lack of lead produce surfaces that are aesthetically impeccable when Ecocast parts are coated.
Functional Properties, Long-Lasting Look
The extremely corrosion-resistant brass material Ecocast has a premium golden surface that is especially long -lasting, making it suitable even for frequently used objects and room fixtures made from cast parts. Ecocast also has high color stability and resistance to degradation caused by contact, air humidity, or intensive cleaning, which increases hygiene safety in hospitals, clinics, and nursing care institutions. - The innovative cast material from Wieland retains its functional properties even with heavy day-to-day use.
Materials
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
K18/K32 | Cu-ETP | CW004A | C11000 |
K18/K32 | Cu-ETP | CW004A | C11000 |
K20/K21/K28 | Cu-DHP | CW024A | C12200 |
K30 | Cu-OF | CW008A | C10200 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
K41 | CuNi1Pb1P* | - | C19150 / C19160 |
K44 | CuNi1Pb0.6P* | - | C19140 / C19150 |
K52 | CuNi2Si | CW111C | C70260 |
K54 | CuNi2SiCr* | - | C81540 |
KC1 | CuPb1P | CW113C | C18700 |
Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. |
---|---|---|---|---|
Z11 | CuZn35Pb1 | CW600N | C34000 | |
Z12 | CuZn35Pb2 | CW601N | C34200 / C34500 | |
Z21 | CuZn38Pb2 | CW608N | C3713 | |
Z23 | CuZn36Pb3 | CW603N | C36000 | |
Z29 | CuZn39Pb2 | CW612N | C37700 | |
Z31/Z41/Z48 | CuZn40Pb2 | CW617N | C38000 | |
Z32/Z33 | CuZn39Pb3 | CW614N | C38500 | |
Z43 | CuZn33Pb1AlSiAs | CW725R | - | |
Z45/Z46 | CuZn36Pb2As | CW602N | C35330 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
S31 | CuZn31Si1 | CW708R | - |
S40 | CuZn37Mn3Al2PbSi | CW713R | C67420 |
eco SW1® | CuZn21Si3P | CW724R | C69300 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
B06 | CuSn6 | CW452K | C51900 |
B12/B21 | CuSn8P/CuSn8 | CW459K/CW453K | C52100 |
B44/B45 | CuSn4Pb4Zn4 | CW456K | C54400 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
U33 | CuAl10Ni5Fe4 | CW307G | C63000 |
U36 | CuAl11Fe6Ni6 | CW308G | - |
U39 | Cu Al10Fe3Mn2 | CW306G | - |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
N29 | CuNi18Zn20 | CW409J | - |
N32 | CuNi12Zn30Pb1 | CW406J | - |
N37 | CuNi18Zn19Pb1 | CW408J | - |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
A01 | AlMgSiBi | AW-6026 | - |
A02 | AlCu6BiPb | AW-2011 | - |
A03 | AlCu4MgSi(A) | AW-2017A | - |
A07 | AlZn5,5MgCu | AW-7075 | - |
A11 | AlSi1Sn1MgBi | AW-6023 | - |
A12 | AlMgSiPb | AW-6012 | - |
A13 | AlMg3 | AW-5754 | - |
A14 | AlMg4,5Mn0,7 | AW-5083 | - |
A22 | AlMgSi | AW-6060 | - |
A32 | AlSi1MgMn | AW-6082 | - |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
Z31/Z41/Z48 | CuZn40Pb2 | CW617N | C38000 |
Z32/Z33 | CuZn39Pb3 | CW614N | C38500 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
A22 | AlMgSi | AW-6060 | - |
Learn more about
Wieland ecoline
From Europe’s largest copper alloy foundry in Vöhringen/Iller (Germany), we can offer you far in excess of a hundred different copper materials. These include not only a wide range of continuous castings like tubes and rods, but also shaped rods and sections of complex geometries. At the same time, our flexibility ensures the prompt realisation of your special custom wishes.
Materials
Wieland hot stamping rods
Good forging results can be obtained only when all links in the process chain have been matched to each other to the optimal effect. With Wieland hot stamping rods you are offered a forging stock which comprehensively fulfils these requirements. Your benefits: uniform dark surface for reproducible processing properties, tight diameter tolerances in the drawn size range, and hence precise configuration of the slug weight.
Materials
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
Z31/Z41/Z48 | CuZn40Pb2 | CW617N | C38000 |
Z32/Z33 | CuZn39Pb3 | CW614N | C38500 |
Learn more
Strips for connector
Hot dip tinned copper and copper-alloy strip
Strip for semiconductor packages
Materials
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
Z30 | CuZn39Pb2 | CW612N | C37700 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
L49 | CuNi9Sn2 | CW351H | C72500 |
Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. |
---|---|---|---|---|
M15 | CuZn15 | CW502L | C23000 | C2300 |
M28 | CuZn28 | CW504L | C25600 | |
M30 | CuZn30 | CW505L | C26000 | C2600 |
M38 | CuZn37 | CW508L | C27200 | C2720 |
Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. |
---|---|---|---|---|
B14 | CuSn4 | CW450K | C51100 | |
B16 | CuSn6 | CW452K | C51900 | |
B18 | CuSn8 | CW453K | C52100 | C5212 |
Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. |
---|---|---|---|---|
N12 | CUNi12Zn24 | CW403J | C75700 | |
N17 | CuNi18Zn27 | CW410J | C77000 | C7701 |
N18 | CuNi18Zn20 | CW409J | C76400 | C7521 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
A05 | Al99,5 | AW-1050A | - |
A13 | AlMg3 | AW-5754 | - |
A32 | AlSi1MgMn | AW-6082 | - |
A75 | AW-6082 | - | - |
Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. | Dimensions |
---|---|---|---|---|---|
K11 | Cu-OF | CW008A | C10200 | ||
K12 | Cu-HCP | CW021A | C10300 | ||
K14 | Cu-PHC | CW020A | C10300 | ||
K18 | Cu-ETP | CW004A | C11000 | ||
K19 | Cu-DHP | CW024A | C12200 | C1220 | on request |
K32 | Cu-ETP | CW004A | C11000 | C1100 | on request |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
Z29 | CuZn39Pb2 | CW612N | C37700 |
Z30 | CuZn39Pb2 | CW612N | C37700 |
Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. |
---|---|---|---|---|
M15 | CuZn15 | CW502L | C23000 | C2300 |
M37 | CuZn37 | CW508L | C27200 | C2720 |
M38 | CuZn37 | CW508L | C27200 | C2720 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
B06 | CuSn6 | CW452K | C51900 |
B16 | CuSn6 | CW452K | C51900 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
U33 | CuAl10Ni5Fe4 | CW307G | C63000 |
Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. |
---|---|---|---|---|
N12 | CUNi12Zn24 | CW403J | C75700 | |
N18 | CuNi18Zn20 | CW409J | C76400 | C7521 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
A03 | AlCu4MgSi(A) | AW-2017A | - |
A05 | Al99,5 | AW-1050A | - |
A07 | AlZn5,5MgCu | AW-7075 | - |
A13 | AlMg3 | AW-5754 | - |
A14 | AlMg4,5Mn0,7 | AW-5083 | - |
A32 | AlSi1MgMn | AW-6082 | - |
A75 | AW-6082 | - | - |
A86 | - | - | - |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
K18/K32 | Cu-ETP | CW004A | C11000 |
K20/K21/K28 | Cu-DHP | CW024A | C12200 |
Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. |
---|---|---|---|---|
Z11 | CuZn35Pb1 | CW600N | C34000 | |
Z21 | CuZn38Pb2 | CW608N | C3713 | |
Z31/Z41/Z48 | CuZn40Pb2 | CW617N | C38000 | |
Z32/Z33 | CuZn39Pb3 | CW614N | C38500 | |
Z45/Z46 | CuZn36Pb2As | CW602N | C35330 |
Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. | Temper |
---|---|---|---|---|---|
M32 | - | - | C26000 | ||
M37/M38 | CuZn37 | CW508L | C27200 | C2720 | |
M37/M38 | CuZn37 | CW508L | C27200 | C2720 | m |
eco M41® | CuZn38As | CW511L | C27453 | extruded/drawn | |
eco M57® | CuZn42 | CW510L | - | extruded/drawn |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
S40 | CuZn37Mn3Al2PbSi | CW713R | C67420 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
B12/B21 | CuSn8P/CuSn8 | CW459K/CW453K | C52100 |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
A05 | Al99,5 | AW-1050A | - |
A13 | AlMg3 | AW-5754 | - |
A22 | AlMgSi | AW-6060 | - |
A32 | AlSi1MgMn | AW-6082 | - |
A66 | - | - | - |
A76 | - | - | - |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
K18/K32 | Cu-ETP | CW004A | C11000 |
Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. | Dimensions | RoHS compliant | REACH | Temper |
---|---|---|---|---|---|---|---|---|
Z12 | CuZn35Pb2 | CW601N | C34200 / C34500 | |||||
Z21 | CuZn38Pb2 | CW608N | C3713 | 3.0 – 6.5 mm | yes | Pb > 0.1 | extruded | |
Z21 | CuZn38Pb2 | CW608N | C3713 | |||||
Z32/Z33 | CuZn39Pb3 | CW614N | C38500 | 1.5 – 8.0 mm | yes | Pb > 0.1 | extruded |
Wieland | EN Designation | EN No. | ASTM UNS-No. | JIS-No. |
---|---|---|---|---|
M37/M38 | CuZn37 | CW508L | C27200 | C2720 |
eco M41® | CuZn38As | CW511L | C27453 | |
eco M57® | CuZn42 | CW510L | - |
Wieland | EN Designation | EN No. | ASTM UNS-No. |
---|---|---|---|
eco SW1® | CuZn21Si3P | CW724R | C69300 |
Capabilities
Logistics
Our comprehensive inventory and excellent contacts with leading international manufacturers as well as the use of state-of-the-art storage technology allow for just-in-time deliveries.
As a mediator between production and further processing, our processes are continuously adjusted and optimised according to customer requirements, with high product quality and on-time delivery having top priority.
For further information please contact us
Recycling
Recycling management will increasingly gain in importance. We promote environmentally friendly production by collecting material waste that has been generated in your production.
For the collection of your waste, we put small containers of 0.5 m³ at your disposal free of charge. For larger amounts of waste, containers of 10 m³ are available to you. Scrap is systematically turned into raw material for new, high-quality semi-finished products. By recycling the waste material and subsequent remelting, the cycle of imperishable metals is closed.
Benefit from our attractive conversion conditions.
For further information please contact Birgit Krause.
Surface plating
We ensure that your material is foil coated or surface plated. In cooperation with certified surface platers, we offer you strip, sheet and sections in various alloys with different surfaces.
For further information please contact us.
Value-added processing/cutting to length
Through the use of state-of-the-art automatic sawing machines, we offer you, upon request, to deliver rod sections in cut lengths with the closest cutting tolerances. To optimise your material input we supply you with cut to length plates with the closest tolerances.
For further information please contact us.
Contact person
Get in touch - Your contact person at Wieland Metal Services Germany GmbH | Trossingen
Nico Weisser
Managing Director
Wieland Metal Services Germany GmbH | Trossingen
+49 7425 947 26
Send email
Patrick Schneider
Sales Director
Wieland Metal Services Germany GmbH | Trossingen
+49 7425 947-28
Send email
Stefanie Alexander
Assistant to the Managing Director and Sales Manager
Wieland Metal Services Germany GmbH | Trossingen
+49 7425 947-20
Send email
Thomas Kohler
Sales | Customer Service
Wieland Metal Services Germany GmbH | Trossingen
+49 7425 947 38
Send email
Ines Samek
Sales | Customer Service
Wieland Metal Services Germany GmbH | Trossingen
+49 7425 947 36
Send email
Lara Schwarz
Sales | Customer Service
Wieland Metal Services Germany GmbH | Trossingen
+49 7425 947 58
Send email
Florian Person
Customer Service | Head of Service
Wieland Metal Services Germany GmbH | Trossingen
+49 7425 947 24
Send email
Muhammet Ayyildiz
Sales |Customer Service
Wieland Metal Services Germany GmbH | Trossingen
+49 7425 947-25
Send email
Christian Seemann
Customer Service
Wieland Metal Services Germany GmbH | Trossingen
+49 7425 947 27
Send email
Katja Kessler
Customer Service
Wieland Metal Services Germany GmbH | Trossingen
+49 7425 947 0
Send email
Marlene Ghozlany
Customer Service
Wieland Metal Services Germany GmbH | Trossingen
+49 7425 947 21
Send email
Suzana Kovacic
Customer Service | QM
Wieland Metal Services Germany GmbH | Trossingen
+49 7425 947 32
Send email
Birgit Krause
Customer Service | Metal Recycling
Wieland Metal Services Germany GmbH | Trossingen
+49 7425 947 23
Send email
Nedeljko Curcija
Warehouse manager
Wieland Metal Services Germany GmbH | Trossingen
+49 7425 947 52
Send email
Wieland Metal Services Germany GmbH
Graf-Arco-Straße 36
89079 Ulm
Germany
Managing Director:
Christoph Altrichter
Court of Registration: Ulm HRB 745718
VAT Identification Number: DE358435645
Career
Start your career at Wieland Metal Services Germany GmbH | Trossingen
Unleash potential.
Already know your search term? Then go ahead and use our full text search. You will get a list of all relevant results.